Pashayan A G, Gravenstein J S
Anesthesiology. 1985 Mar;62(3):274-7. doi: 10.1097/00000542-198503000-00011.
Polyvinyl chloride (PVC) endotracheal tube segments were exposed to a 5.0-W CO2 laser beam in the presence of different fractions of oxygen and either helium or nitrogen. Time from onset of exposure until ignition was recorded, and mean time to ignition (MTI) was calculated after 10 exposures with the same gas mixture. A second series was done with 40% oxygen in either nitrogen or helium and a laser intensity of 7.5, 10.0, or 12.5 W; a third with 40% oxygen, 60% helium, and 2% halothane and a 10.0-W laser beam; and a fourth with 40% oxygen and 60% helium and a 10.0-W laser beam directed at the radioopaque barium sulfate stripe on the tube. With 5.0-W and 20% oxygen in either nitrogen or helium, segments did not ignite. With concentrations of oxygen greater than 20% in nitrogen, segments ignited sooner than with comparable concentrations in helium: MTIHe = 55.6 s and MTIN2 = 27.6 s in 40% oxygen (P less than 0.05). Sixty per cent helium remained protective at laser intensities up to 10.0 W (MTIHe = 42.6 s vs. MTIN2 = 14.3 s) (P less than 0.05). However, at 12.5 W, MTIHe = 11.5 s and MTIN2 = 11.3 s. Two per cent halothane in 40% oxygen and 60% helium reduced MTIHe to 25.3 s compared with 42.3 s without halothane. With the laser directed at the barium stripe, MTIHe was 7.2 s and MTIN2 1.1 s.(ABSTRACT TRUNCATED AT 250 WORDS)
将聚氯乙烯(PVC)气管导管节段置于不同氧含量以及氦气或氮气环境中,用功率为5.0瓦的二氧化碳激光束照射。记录从开始照射到着火的时间,并在使用相同气体混合物进行10次照射后计算平均着火时间(MTI)。第二组实验是在氮气或氦气中通入40%的氧气,激光强度分别为7.5瓦、10.0瓦或12.5瓦;第三组是在40%氧气、60%氦气和2%氟烷的环境中,用10.0瓦的激光束照射;第四组是在40%氧气和60%氦气的环境中,用10.0瓦的激光束照射气管导管上的不透射线硫酸钡条纹。在氮气或氦气中通入20%氧气以及5.0瓦激光束照射时,导管节段未着火。在氮气中氧气浓度大于20%时,导管节段比在氦气中相同浓度氧气时着火更快:在40%氧气中,氦气环境下的MTI为55.6秒,氮气环境下为27.6秒(P<0.05)。在激光强度高达10.0瓦时,60%的氦气仍具有保护作用(氦气环境下MTI为42.6秒,氮气环境下为14.3秒)(P<0.05)。然而,在12.5瓦时,氦气环境下MTI为11.5秒,氮气环境下为11.3秒。在40%氧气、60%氦气和2%氟烷的环境中,与无氟烷时MTI为42.3秒相比,MTI降至25.3秒。当激光照射硫酸钡条纹时,氦气环境下MTI为7.2秒,氮气环境下为1.1秒。(摘要截断于250字)