[Studies on the performance of the dental air turbine handpieces. (Part 1). Air pressure and bur length to be influenced over the rotational performance of the air bearing type handpieces (author's transl)].

Air turbine handpieces are used as the dental cutting instruments for the clinical use and many appliances. But, there are no studies on the performance of air turbine handpieces. So, this paper shows the rotational performance of air turbine handpieces which are influenced over the supplying air pressure and cutting bur length. Experimentally used air turbine handpieces is air bearing type and it's set up air pressure to be supplied is 3.5 kg/cm2. So, in this experiments, the range of air pressure is 1.8 approximately 3.5 kg/cm2, which is established five stages. And the bur length of the rotational parts is 5 approximately 9 mm with five steps. As the results, the rotational performance of air handpieces are influenced over these factors of the air pressure and the bur length. And air pressure to be supplied are influenced to be not only over the rotational speed but the load for the putting a stop to the revolutions.