Lee Jung-Min, Chen Wen-Ming, Park Chul Hyun, Cho Seung Jae, Woo Inha
Department of Biomedical Engineering, Inje University, Gimhae, 50834 Republic of Korea.
Academy for Engineering and Technology, Fudan University, Shanghai, 200433 China.
Biomed Eng Lett. 2024 May 27;14(5):1079-1085. doi: 10.1007/s13534-024-00394-z. eCollection 2024 Sep.
Supramalleolar osteotomy (SMO) is a representative procedure to restore a malalignment in the varus ankle deformity by shifting the concentrated pressure on the medial ankle joint to the lateral area. Additionally, fibula osteotomy (FO) is selectively selected and performed according to the surgeon's preference. However, it is controversial whether FO is effective in shifting the abnormal pressure from the medial to the lateral area on the ankle joint. Some cadaveric studies have been performed to prove this. However, it is difficult to consistently reconstruct amount of the varus ankle deformities angle in cadavers and to guarantee reliable contact pressure between the ankle joint. Thus, the aim of this study was predicted and quantitatively compared a peak pressure between single SMO and SMO with FO procedure by using a finite element analysis as a powerful biomechanical tool to those limitations of cadaveric study. This study reconstructed total 4 3D foot and ankle models including a normal and pre-op model and 2 post-op models. The pre-op model was modified by assigning 10° varus tilting corresponding to stage 3b in the classification of varus ankle osteoarthritis based on the validated normal model. Also, the post-op models were reconstructed by applying single SMO and SMO with FO, respectively. All of the models were assumed as one-leg standing position and to mimic smooth ankle joint motion. Peak contact pressure change was predicted at the medial ankle joint by using computational simulation. As a result, 2 post-op models showed a remarkably peak pressure reduction by up to 5.5 times on the medial tibiotalar joint. However, a comparison between single SMO and SMO with FO model showed no appreciable differences. In conclusion, this study predicted that single SMO may be as effective as SMO with FO in reducing peak contact pressure on the medial tibiotalar joint in varus ankle osteoarthritis.
距下关节上截骨术(SMO)是一种具有代表性的手术,通过将踝关节内侧的集中压力转移至外侧区域,来矫正内翻踝关节畸形中的对线不良。此外,腓骨截骨术(FO)会根据外科医生的偏好进行选择性选择和实施。然而,FO在将踝关节异常压力从内侧转移至外侧区域方面是否有效仍存在争议。一些尸体研究已开展以证明这一点。然而,在尸体中始终如一地重建内翻踝关节畸形角度的大小并保证踝关节之间可靠的接触压力是困难的。因此,本研究的目的是通过使用有限元分析这一强大的生物力学工具,预测并定量比较单纯SMO与联合FO手术之间的峰值压力,以克服尸体研究的这些局限性。本研究共重建了4个全足踝关节三维模型,包括1个正常模型、1个术前模型和2个术后模型。基于经验证的正常模型,通过赋予10°内翻倾斜来修改术前模型,该倾斜度对应于内翻踝关节骨关节炎分类中的3b期。此外,分别通过应用单纯SMO和联合FO手术来重建术后模型。所有模型均假定为单腿站立姿势,并模拟踝关节的平滑运动。通过计算模拟预测内侧踝关节的峰值接触压力变化。结果,2个术后模型显示内侧胫距关节的峰值压力显著降低,降幅高达5.5倍。然而,单纯SMO模型与联合FO模型之间的比较显示无明显差异。总之,本研究预测,在降低内翻踝关节骨关节炎内侧胫距关节的峰值接触压力方面,单纯SMO可能与联合FO手术同样有效。