Suppr超能文献

镍钛弹簧扩弓器和快速上颌扩弓器治疗后上颌第一磨牙自发性扭转的数字化模型三维评估:一项双中心随机对照试验

Three-dimensional assessment on digital cast of spontaneous upper first molar distorotation after Ni-ti leaf springs expander and rapid maxillary expander: A two-centre randomized controlled trial.

作者信息

Abate Andrea, Ugolini Alessandro, Bruni Alessandro, Quinzi Vincenzo, Lanteri Valentina

机构信息

Department of Sciences Integrated Surgical and Diagnostic, University of Genova, Genoa, Italy.

Surgical, Medical and Dental Department, University of Modena and Reggio Emilia, Modena, Italy.

出版信息

Orthod Craniofac Res. 2025 Feb;28(1):104-115. doi: 10.1111/ocr.12849. Epub 2024 Sep 8.

Abstract

OBJECTIVE

The aim of this randomized controlled trial (RCT) was to evaluate the spontaneous distorotation of upper first permanent molars and the transverse dentoalveolar changes on digital casts in growing patients following maxillary expansion treatment using either the Leaf Expander® or the rapid maxillary expander (RME), both anchored to the deciduous second molar.

TRIAL DESIGN AND SETTING

This study was a two-arm, parallel-assignment, RCT with a dual-centre design conducted at two teaching hospitals in Italy.

PARTICIPANTS

Inclusion criteria included maxillary transverse deficiency, prepubertal development stage (cervical vertebra maturation stage [CVMS] 1-2) and early mixed dentition with fully erupted upper first permanent molars. Exclusion criteria were systemic diseases or syndromes, CVMS 3-6, agenesis of upper second premolars, unavailability of the second deciduous molar for anchorage and Class III malocclusion.

RANDOMIZATION

Patients were randomly assigned to the Leaf Expander® or RME group using a computer-generated randomization list created by a central randomization centre. Randomization was conducted immediately before the start of treatment.

INTERVENTION

The intervention involved treatment with either the Leaf Expander® or the RME. Both devices were anchored to the second deciduous molars. Following randomization, patients were further categorized based on the presence of no crossbite, unilateral crossbite or bilateral crossbite.

MAIN OUTCOME MEASURE

The primary outcome measure was the distorotation of the upper first molar (U6). Secondary outcomes included measurements of interdental linear dimensions, specifically upper inter-canine width (53-63), upper inter-molar width (MV16-MV26) and upper inter-deciduous second molar width (55-65).

BLINDING

The examiner analysing the digital casts was blinded to the treatment groups to prevent detection bias and ensure objective assessment. However, due to the nature of the intervention, blinding was not feasible for the patients and clinicians involved in administering the treatment.

RESULTS

A total of 150 patients were enrolled and randomly assigned to two groups: 75 to the Leaf Expander® group and 75 to the RME group. Recruitment started in November 2021 and was completed in November 2022. At the time of analysis, the trial was complete with no ongoing follow-ups. ANOVA tests revealed no significant differences between the three subgroups (no-cross, unilateral-cross and bilateral-cross) within both the Leaf Expander® and RME groups at T0. The Leaf Expander® demonstrated significantly greater distorotation in the unilateral crossbite subgroup compared to the RME (p = .014). In terms of total molar distorotation, the Leaf Expander® appliance showed a significantly greater effect (12.66°) compared with conventional RME (7.83°). Linear regression analysis demonstrated a significant correlation between the extent of expansion and the degree of molar rotation.

CONCLUSIONS

Maxillary expansion resulted in significant spontaneous molar distorotation when the appliance was bonded to the second deciduous molars. The Leaf Expander® exhibited significantly greater molar distorotation compared with conventional RME. The degree of molar distorotation was correlated with the extent of expansion obtained on the second deciduous molar.

TRIAL REGISTRATION

The trial was registered at ClinicalTrials.gov (ID: NCT05135962).

摘要

目的

本随机对照试验(RCT)的目的是评估在生长发育期患者中,使用固定于乳磨牙的Leaf Expander®或快速上颌扩弓器(RME)进行上颌扩弓治疗后,上颌第一恒磨牙的自发扭转以及数字化模型上的横向牙-牙槽变化。

试验设计与设置

本研究为双臂、平行分配的RCT,采用双中心设计,在意大利的两家教学医院进行。

参与者

纳入标准包括上颌横向发育不足、青春期前发育阶段(颈椎成熟阶段[CVMS]1-2)以及上颌第一恒磨牙完全萌出的早期混合牙列。排除标准为全身性疾病或综合征、CVMS 3-6、上颌第二前磨牙缺失、无法利用第二乳磨牙进行支抗以及安氏III类错牙合。

随机分组

使用由中央随机化中心创建的计算机生成随机列表,将患者随机分配至Leaf Expander®组或RME组。随机分组在治疗开始前即刻进行。

干预措施

干预措施包括使用Leaf Expander®或RME进行治疗。两种装置均固定于第二乳磨牙。随机分组后,根据是否存在反牙合、单侧反牙合或双侧反牙合对患者进一步分类。

主要观察指标

主要观察指标为上颌第一磨牙(U6)的扭转。次要观察指标包括牙间线性尺寸测量,具体为上颌尖牙间宽度(53-63)、上颌磨牙间宽度(MV16-MV26)以及上颌第二乳磨牙间宽度(55-65)。

盲法

分析数字化模型的检查者对治疗组情况不知情,以防止检测偏倚并确保客观评估。然而,由于干预措施的性质,参与治疗的患者和临床医生无法实施盲法。

结果

共纳入150例患者并随机分为两组:75例进入Leaf Expander®组,75例进入RME组。招募工作于2021年11月开始,2022年11月完成。在分析时,试验已结束,无正在进行的随访。方差分析显示,在T0时,Leaf Expander®组和RME组内的三个亚组(无反牙合、单侧反牙合和双侧反牙合)之间无显著差异。与RME相比,Leaf Expander®在单侧反牙合亚组中表现出显著更大的扭转(p = 0.014)。就磨牙总扭转而言,Leaf Expander®矫治器显示出比传统RME显著更大的效果(12.66°)与(7.83°)。线性回归分析表明,扩弓程度与磨牙旋转程度之间存在显著相关性。

结论

当矫治器固定于第二乳磨牙时,上颌扩弓导致明显的磨牙自发扭转。与传统RME相比,Leaf Expander®表现出显著更大的磨牙扭转。磨牙扭转程度与第二乳磨牙获得的扩弓程度相关。

试验注册

本试验已在ClinicalTrials.gov注册(注册号:NCT05135962)。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/123b/11701968/9ac744787ad8/OCR-28-104-g002.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验