Wang Zimou, Yang Junjie, Wu Yalei
College of Environmental Science and Engineering, Ocean University of China, Qingdao 266100, China.
The Key Laboratory of Marine Environment and Ecology of the Ministry of Education, Ocean University of China, Qingdao 266100, China.
Materials (Basel). 2024 Aug 29;17(17):4272. doi: 10.3390/ma17174272.
The disposal of stone waste derived from the stone industry is a worldwide problem. The shortage of landfills, as well as transport costs and environmental pollution, pose a crucial problem. Additionally, as a substitute for cement that has high carbon emissions, energy consumption, and pollution, the disposal of stone wastes by utilizing solid waste-based binders as road base materials can achieve the goal of "waste for waste". However, the mechanical properties and deterioration mechanism of solid waste-based binder solidified stone waste as a road base material under complex environments remains incompletely understood. This paper reveals the durability performance of CGF all-solid waste binder (consisting of calcium carbide residue, ground granulated blast furnace slag, and fly ash) solidified stone waste through the macro and micro properties under dry-wet and freeze-thaw cycling conditions. The results showed that the dry-wet and freeze-thaw cycles have similar patterns of impacts on the CGF and cement stone waste road base materials, i.e., the stress-strain curves and damage forms were similar in exhibiting the strain-softening type, and the unconfined compressive strengths all decreased with the number of cycles and then tended to stabilize. However, the influence of dry-wet and freeze-thaw cycles on the deterioration degree was significantly different; CGF showed excellent resistance to dry-wet cycles, whereas cement was superior in freeze-thaw resistance. The deterioration grade of CGF and cement ranged from 36.15 to 47.72% and 39.38 to 47.64%, respectively, after 12 dry-wet cycles, whereas it ranged from 57.91 to 64.48% and 36.61 to 40.00% after 12 freeze-thaw cycles, respectively. The combined use of MIP and SEM confirmed that the deterioration was due to the increase in the porosity and cracks induced by dry-wet and freeze-thaw cycles, which in turn enhanced the deterioration phenomenon. This can be ascribed to the fact that small pores occupy the largest proportion and contribute to the deterioration process, and the deterioration caused by dry-wet cycles is associated with the formation of large pores through the connection of small pores, while the freeze-thaw damage is due to the increase in medium pores that are more susceptible to water intrusion. The findings provide theoretical instruction and technical support for utilizing solid waste-based binders for solidified stone waste in road base engineering.
石材工业产生的石屑处理是一个全球性问题。垃圾填埋场短缺以及运输成本和环境污染构成了一个关键问题。此外,作为高碳排放、高能耗和高污染水泥的替代品,利用基于固体废物的粘结剂将石屑作为道路基层材料进行处理可以实现“变废为宝”的目标。然而,在复杂环境下,基于固体废物的粘结剂固化石屑作为道路基层材料的力学性能和劣化机理仍未完全明晰。本文通过干湿循环和冻融循环条件下的宏观和微观性能揭示了CGF全固体废物粘结剂(由电石渣、磨细粒化高炉矿渣和粉煤灰组成)固化石屑的耐久性性能。结果表明,干湿循环和冻融循环对CGF和水泥石屑道路基层材料的影响模式相似,即应力-应变曲线和破坏形式相似,均呈现应变软化型,无侧限抗压强度均随循环次数增加而降低,然后趋于稳定。然而,干湿循环和冻融循环对劣化程度的影响存在显著差异;CGF表现出优异的抗干湿循环性能,而水泥在抗冻融性能方面更胜一筹。经过12次干湿循环后,CGF和水泥的劣化等级分别为36.15%至47.72%和39.38%至47.64%,而经过12次冻融循环后,分别为57.91%至64.48%和36.61%至40.00%。MIP和SEM的联合使用证实,劣化是由于干湿循环和冻融循环导致孔隙率和裂缝增加,进而加剧了劣化现象。这可以归因于小孔占比最大且对劣化过程有贡献,干湿循环引起的劣化与小孔连通形成大孔有关,而冻融破坏则是由于更易受水侵入的中孔增加所致。这些研究结果为道路基层工程中利用基于固体废物的粘结剂固化石屑提供了理论指导和技术支持。