Sznajder Paweł, Zdybel Piotr, Liu Lujia, Ekiel-Jeżewska Maria L
<a href="https://ror.org/03fs4aq04">Institute of Fundamental Technological Research</a>, Polish Academy of Sciences, Pawińskiego 5B, 02-106 Warsaw, Poland.
Phys Rev E. 2024 Aug;110(2-2):025104. doi: 10.1103/PhysRevE.110.025104.
We analyze the three-dimensional (3D) buckling of an elastic filament in a shear flow of a viscous fluid at low Reynolds number and high Péclet number. We apply the Euler-Bernoulli beam (elastica) theoretical model. We show the universal character of the full 3D spectral problem for a small perturbation of a thin filament from a straight position of arbitrary orientation. We use the eigenvalues and eigenfunctions for the linearized elastica equation in the shear plane, found earlier by Liu et al. [Phys. Rev. Fluids 9, 014101 (2024)2469-990X10.1103/PhysRevFluids.9.014101] with the Chebyshev spectral collocation method, to solve the full 3D eigenproblem. We provide a simple analytic approximation of the eigenfunctions, represented as Gaussian wave packets. As the main result of the paper, we derive the square-root dependence of the eigenfunction wave number on the parameter χ[over ̃]=-ηsin2ϕsin^{2}θ, where η is the elastoviscous number and the filament orientation is determined by the zenith angle θ with respect to the vorticity direction and the azimuthal angle ϕ relative to the flow direction. We also compare the eigenfunctions with shapes of slightly buckled elastic filaments with a non-negligible thickness with the same Young's modulus, using the bead model and performing numerical simulations with the precise hydromultipole numerical codes.
我们分析了粘性流体在低雷诺数和高佩克莱数下的剪切流中弹性细丝的三维(3D)屈曲。我们应用了欧拉 - 伯努利梁(弹性曲线)理论模型。我们展示了对于任意取向的直细丝的小扰动,全三维谱问题的普适特征。我们使用刘等人[《物理评论流体》9, 014101 (2024)2469 - 990X10.1103/PhysRevFluids.9.014101]先前通过切比雪夫谱配置法得到的剪切平面内线性化弹性曲线方程的特征值和特征函数,来求解全三维本征问题。我们给出了表示为高斯波包的特征函数的简单解析近似。作为本文的主要结果,我们推导了特征函数波数与参数χ[上加~]= - ηsin²ϕsin²θ的平方根依赖关系,其中η是弹性粘性数,细丝取向由相对于涡度方向的天顶角θ和相对于流动方向的方位角ϕ确定。我们还使用珠子模型并使用精确的流体多极数值代码进行数值模拟,将特征函数与具有相同杨氏模量且厚度不可忽略的轻微屈曲弹性细丝的形状进行比较。