Clinical outcome of monolithic zirconia on bonded or mechanically retained prefabricated titanium-base: A 4-year retrospective study.

OBJECTIVE

To assess the clinical performance of monolithic screw-retained implant-supported zirconia crowns (MSI) bonded or mechanically retained on prefabricated Ti-bases using a complete digital workflow.

METHODS

A retrospective analysis was conducted on patients who underwent single dental implant procedures between January 2017 and May 2018. Inclusion criteria were: patients over 18 years of age; implants placed in posterior sites; MSI on prefabricated Ti-base realized by using a complete digital workflow; a minimum follow-up period of 2 years. Cemented crowns and fixed dental prosthesis were excluded. Mechanical complications included: fracture of Ti-base; loss of retention; loosening of Ti-base screws. Technical complications included: fracture and debonding of monolithic zirconia. Biological complication was set strictly at a probing pocket depth of 5 mm and bleeding on probing or pus secretion.

RESULTS

A total of 144 dental implants placed in 127 patients were included, 73 with a fully tapered implant system (BLX) and 71 with a conical connection system (Nobel Parallel CC). Of the 73 BLX implants, 4 experienced loosening of the Ti-base screw, while 3 Nobel Parallel CC implants experienced the same problem. In addition, 4 fractures of the Ti-base and 6 fractures of the inner surface of the monolithic zirconia were observed in the Nobel Parallel CC implants. Cumulative survival was 100 % for bonded crowns and 85 % for mechanically retained crowns. Radiographic evaluation revealed a mean CBL of 0.12 mm for the BLX and 0.13 mm for the Nobel Parallel CC implants with no statistically significant differences between the Ti-base types. There was no evidence of bleeding on probing or pus secretion. All probing pocket depths were <3 mm.

CONCLUSION

The use of a prefabricated Ti-base remains a clinically acceptable choice, however, MSIs bonded to prefabricated Ti-bases had fewer mechanical and technical complications than the MSI mechanically retained to a prefabricated Ti-base.