Lazar Maria Marinela, Damaschin Roxana P, Volf Irina, Dinu Maria Valentina
"Petru Poni" Institute of Macromolecular Chemistry, Grigore Ghica Voda Alley 41A, 700487 Iasi, Romania.
"Cristofor Simionescu" Faculty of Chemical Engineering and Environmental Protection, "Gheorghe Asachi" Technical University of Iași, 73 Prof. Dr. Docent D. Mangeron Street, 700050 Iași, Romania.
Gels. 2024 Aug 23;10(9):546. doi: 10.3390/gels10090546.
Polysaccharides have recently attracted growing attention as adsorbents for various pollutants, since they can be extracted from a variety of renewable sources at low cost. An interesting hydrophilic and biodegradable polysaccharide is dextran (Dx), which is well-known for its applications in the food industry and in medicine. To extend the application range of this biopolymer, in this study, we investigated the removal of crystal violet (CV) and methylene blue (MB) dyes from an aqueous solution by Dx-based cryogels using the batch technique. The cryogel adsorbents, consisting of cross-linked Dx embedding a polyphenolic (PF) extract of spruce bark, were prepared by the freeze-thawing approach. It was shown that the incorporation of PF into the Dx-based matrix induced a decrease in porosity, pore sizes and swelling ratio values. Moreover, the average pore sizes of the DxPF cryogels loaded with dyes further decreased from 42.30 ± 7.96 μm to 23.68 ± 2.69 μm, indicating a strong interaction between the functional groups of the cryogel matrix and those of the dye molecules. The sorption performances of the DxPF adsorbents were evaluated in comparison to those of the Dx cryogels and of the PF extract. The experimental sorption capacities of the DxPF cryogel adsorbents were higher in comparison to those of the Dx cryogels and the PF extract. The DxPF cryogels, particularly those with the highest PF contents (sample DxPF2), demonstrated sorption capacities of 1.2779 ± 0.0703 mmol·g, for CV, and 0.3238 ± 0.0121 mmol·g, for MB. The sorption mechanisms were analyzed using mathematical models, including Langmuir, Freundlich, Sips and Dubinin-Radushkevich isotherms, and kinetic models, like pseudo-first-order (PFO), pseudo-second-order (PSO), Elovich and intra-particle diffusion (IPD). The sorption process was best described by the Sips isotherm and PSO kinetic models, indicating chemisorption as the dominant mechanism. This study outlines the importance of developing advanced renewable materials for environmental applications.
多糖作为各种污染物的吸附剂最近受到越来越多的关注,因为它们可以从各种可再生资源中低成本提取。一种有趣的亲水性和可生物降解的多糖是葡聚糖(Dx),它在食品工业和医学中的应用广为人知。为了扩大这种生物聚合物的应用范围,在本研究中,我们采用分批技术研究了基于Dx的冷冻凝胶从水溶液中去除结晶紫(CV)和亚甲基蓝(MB)染料的情况。冷冻凝胶吸附剂由交联的Dx嵌入云杉树皮的多酚(PF)提取物组成,通过冻融法制备。结果表明,将PF掺入基于Dx的基质中会导致孔隙率、孔径和溶胀率值降低。此外,负载染料的DxPF冷冻凝胶的平均孔径从42.30±7.96μm进一步降至23.68±2.69μm,表明冷冻凝胶基质的官能团与染料分子的官能团之间存在强烈相互作用。与Dx冷冻凝胶和PF提取物相比,评估了DxPF吸附剂的吸附性能。与Dx冷冻凝胶和PF提取物相比,DxPF冷冻凝胶吸附剂的实验吸附容量更高。DxPF冷冻凝胶,特别是那些PF含量最高的(样品DxPF2),对CV的吸附容量为1.2779±0.0703 mmol·g,对MB的吸附容量为0.3238±0.0121 mmol·g。使用数学模型分析吸附机制,包括朗缪尔、弗伦德利希、西普斯和杜比宁-拉杜舍维奇等温线,以及动力学模型,如拟一级(PFO)、拟二级(PSO)、埃洛维奇和颗粒内扩散(IPD)。吸附过程最好用西普斯等温线和PSO动力学模型来描述,表明化学吸附是主要机制。本研究概述了开发用于环境应用的先进可再生材料的重要性。