Carles C, Martin P
Arch Biochem Biophys. 1985 Nov 1;242(2):411-6. doi: 10.1016/0003-9861(85)90225-5.
A study was carried out to determine the Michaelian parameters relative to the action of chymosin and pepsin A on bond Phe105-Met106 of bovine kappa0-casein (carbohydrate-free fraction in micellar state). The reaction was performed in citrate buffer, pH 6.2, at 30 degrees C. The reaction mixture was analysed by reverse phase HPLC. Dosages of peptide 106-169 (caseino macropeptide) at different reaction times from recordings of its absorbance at 220 nm gave the initial rates of reaction at each substrate concentration. From these values the following parameters were determined: kcat = 68.5 s-1, Km = 0.048 mM, kcat/Km = 1,413 mM-1 s-1 for chymosin, and kcat = 45 s-1, Km = 0.018 mM, kcat/Km = 2,439 mM-1 s-1 for pepsin A. For chymosin they are similar to those obtained previously in dimethyl glutarate buffer, pH 6.6, at 30 degrees C, using fragment 98-111 of kappa-casein as substrate. It can thus be concluded that neither the micellar state nor the presence of the whole peptide chain of kappa-casein (our conditions) significantly affect the action of chymosin on fragment 98-111, which seems to contain all information that makes bond 105-106 highly sensitive to chymosin. For pepsin A, only the information contained in fragment 103-108 appears to be required.
开展了一项研究,以确定与凝乳酶和胃蛋白酶A作用于牛κ-酪蛋白(胶束状态的无碳水化合物部分)的Phe105-Met106键相关的米氏参数。反应在pH 6.2的柠檬酸盐缓冲液中于30℃进行。反应混合物通过反相高效液相色谱法进行分析。根据在220nm处记录的吸光度,在不同反应时间测定肽106-169(酪蛋白巨肽)的剂量,得出每种底物浓度下的初始反应速率。根据这些值确定了以下参数:凝乳酶的kcat = 68.5 s-1,Km = 0.048 mM,kcat/Km = 1413 mM-1 s-1;胃蛋白酶A的kcat = 45 s-1,Km = 0.018 mM,kcat/Km = 2439 mM-1 s-1。对于凝乳酶,它们与之前在pH 6.6的二甲基戊二酸缓冲液中于30℃使用κ-酪蛋白的98-111片段作为底物时获得的值相似。因此可以得出结论,无论是胶束状态还是κ-酪蛋白整条肽链的存在(我们的实验条件)都不会显著影响凝乳酶对98-111片段的作用,该片段似乎包含了使105-106键对凝乳酶高度敏感的所有信息。对于胃蛋白酶A,似乎只需要103-108片段中包含的信息。