Thermal calibration for triaxial gyroscope of MEMS-IMU based on segmented systematic method.

With the progress of micro electromechanical system (MEMS) technology, the performance of MEMS inertial measurement unit (IMU) composed of gyroscopes and accelerometers has been improved. Among the inertial sensors, MEMS triaxial gyroscope plays an important role in attitude estimation, navigation and positioning of intelligent mobile terminals such as unmanned aerial vehicles and unmanned vehicles. However, the measured values of low and medium cost MEMS triaxial gyroscopes are mainly affected by temperature (or thermal effect) and random errors. As results, the drift errors correlated with temperature will reduce application accuracy of MEMS triaxial gyroscope. The traditional calibration method for thermal drift errors relies on the expensive equipment, such as turntable and the temperature control system, which increases the cost of calibration. Therefore, an effective thermal calibration method that is available when using low- or high-cost tools for MEMS triaxial gyroscope will be meaningful for majority users. Hence, this paper analyzed and established the thermal drift model of MEMS triaxial gyroscope, and proposed a segmented systematic calibration method based on 24 states according to this model. Simulation shows that the proposed method can obtain the results approaching the real parameter thermal drift curves. Calibration experiments and parameters test show that the max errors of attitude calculation are reduced to 10% of the results using the original parameters, which indicates that the effectiveness of the proposed method.