Suppr超能文献

基于修饰丝网印刷电极的水中快速电化学检测的实验室原型。

A Lab Prototype for Rapid Electrochemical Detection of in Water Using Modified Screen-Printed Electrodes.

机构信息

Department of Electrical Engineering, Indian Institute of Technology (IIT) Jodhpur, N.H. 62, Karwar, Jodhpur 342030, Rajasthan, India.

Department of Bioscience and Bioengineering, IIT Jodhpur, N.H. 62, Karwar, Jodhpur 342030, Rajasthan, India.

出版信息

ACS Appl Bio Mater. 2024 Nov 18;7(11):7269-7279. doi: 10.1021/acsabm.4c00952. Epub 2024 Oct 12.

Abstract

Recognizing the need for a hand-held device capable of quantitatively measuring the concentration of bacteria in water, this paper describes a label-free method for rapid detection of () in water via HO decomposition using screen-printed electrodes (SPE) modified with nanostructured metal oxide layers. The study encompasses sensor preparation, bacteria culture, synthesis and characterization of nanostructures, and development of a readout circuitry for lab prototyping. During sensing measurements, the bacteria are first made to interact with HO and subsequently, the HO solution is exposed on the sensing surface. The electrochemical sensors are fabricated by modifying the working electrode of SPE with nanostructured metal oxide layers of MnO and TiO as these play a crucial role in the detection of in water. The sensing experiments of MnO-modified SPE show a significant response to bacteria with a sensitivity of 0.82 mV.mL/log CFU and a limit of detection (LOD) of 1.8 CFU/mL, while the TiO-modified SPE exhibits a linear response over a wide range of bacterial concentrations with a sensitivity of 1.12 mV·mL/log CFU and a limit of detection of 2.23 CFU/mL. Both sensors demonstrate a rapid response, stability, repeatability, and a recovery time of 70 ms. Additionally, selectivity with respect to other bacteria, wastewater components such as glucose, ammonium sulfate, and sodium carbonate, and testing with RO, DI, and tap water samples are conducted to evaluate the sensors' performance. A detailed sensing mechanism has been developed to comprehend the results, including chemical and biological reactions, metal oxide interfaces, morphology, and other surface studies of the sensing surface. A prototype comprising a sensor chip, an Arduino board, and other necessary circuit components is tested with various bacterial solutions. This enables its use for on-field rapid detection of bacteria in water using smaller volumes and a portable system.

摘要

为满足定量测量水中细菌浓度的手持式设备需求,本文描述了一种基于无标记方法,通过使用纳米结构金属氧化物层修饰的丝网印刷电极 (SPE) 对水进行 HO 分解,实现对水中 () 的快速检测。该研究包括传感器制备、细菌培养、纳米结构的合成和表征,以及用于实验室原型开发的读出电路。在传感测量过程中,首先使细菌与 HO 相互作用,然后将 HO 溶液暴露在传感表面上。电化学传感器是通过用 MnO 和 TiO 的纳米结构金属氧化物层修饰 SPE 的工作电极来制备的,因为这些在水中检测 () 中起着至关重要的作用。MnO 修饰的 SPE 的传感实验对细菌表现出显著的响应,灵敏度为 0.82 mV·mL/log CFU,检测限 (LOD) 为 1.8 CFU/mL,而 TiO 修饰的 SPE 在宽浓度范围内对细菌表现出线性响应,灵敏度为 1.12 mV·mL/log CFU,检测限为 2.23 CFU/mL。两种传感器都表现出快速响应、稳定性、重复性和 70 ms 的恢复时间。此外,还针对其他细菌、废水成分(如葡萄糖、硫酸铵和碳酸钠)以及 RO、DI 和自来水样本进行了选择性测试,以评估传感器的性能。已经开发了详细的传感机制来理解结果,包括化学和生物反应、金属氧化物界面、形态学以及传感表面的其他表面研究。一个包含传感器芯片、Arduino 板和其他必要电路组件的原型已用于各种细菌溶液的测试。这使其能够使用更小的体积和便携式系统在现场快速检测水中的细菌。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验