Shi Tao-Tao, Yang Bi, Hu Wei-Guo, Gao Guan-Jin, Jiang Xin-Yu, Yu Jin-Gang
College of Chemistry and Chemical Engineering, Central South University, Changsha 410083, China.
Molecules. 2024 Oct 9;29(19):4772. doi: 10.3390/molecules29194772.
Due to it containing cellulose, hemicellulose, and lignin with abundant specific functional groups which could interact with organic dyes, garlic peel (GP) might be used as an efficient biosorbent. The aim of this study is to evaluate the adsorption performances of GP-based bio-adsorbents and obtain optimum preparation conditions.
GP-based bio-adsorbents were prepared by thermal pyrolysis under different temperatures (150-400 °C). The morphologies, chemical states, and surface functional groups of the adsorbents were analyzed by X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), and thermogravimetric analysis (TGA). Batch experiments were conducted to investigate the adsorption of methylene blue (MB) under various conditions, including contact time, contact temperature, initial dye concentration, and initial pH value. The equilibrium adsorption data were fitted to different kinetic and isothermal models, and the adsorption thermodynamics were also calculated. Significant Findings: The physicochemical properties of the GP-based bio-adsorbents were primarily dominated by the pyrolysis temperature, because their morphologies and surface functional groups of GP-based bio-adsorbents significantly varied with the changes in pyrolysis temperature. The adsorption capacity of GP materials for MB decreased as the pyrolysis temperature increased. At an initial concentration of 50.00 mg L, GP150 possessed a higher adsorption capacity of 167.74 mg g toward MB. The possible adsorbate-adsorbent interactions, including electrostatic attraction, hydrogen bonding, and π-π stacking, were recognized. After 10 consecutive adsorption-desorption cycles, GP150 maintained a high removal rate (88%) for MB, demonstrating its excellent adsorption performance, good reusability, and potential application in the treatment of MB-contaminated water.
由于大蒜皮(GP)含有纤维素、半纤维素和木质素,这些物质带有丰富的特定官能团,能够与有机染料相互作用,因此大蒜皮可能用作一种高效的生物吸附剂。本研究的目的是评估基于大蒜皮的生物吸附剂的吸附性能,并获得最佳制备条件。
通过在不同温度(150 - 400°C)下进行热解制备基于大蒜皮的生物吸附剂。采用X射线光电子能谱(XPS)、傅里叶变换红外光谱(FT - IR)、扫描电子显微镜(SEM)和热重分析(TGA)对吸附剂的形态、化学状态和表面官能团进行分析。进行批量实验以研究在各种条件下,包括接触时间、接触温度、初始染料浓度和初始pH值,对亚甲基蓝(MB)的吸附情况。将平衡吸附数据拟合到不同的动力学和等温模型,并计算吸附热力学。
基于大蒜皮的生物吸附剂的物理化学性质主要受热解温度的影响,因为其形态和表面官能团会随着热解温度的变化而显著改变。随着热解温度升高,大蒜皮材料对亚甲基蓝的吸附容量降低。在初始浓度为50.00 mg/L时,GP150对亚甲基蓝具有较高的吸附容量,为167.74 mg/g。识别出了可能的吸附质 - 吸附剂相互作用,包括静电吸引、氢键和π - π堆积。经过10次连续的吸附 - 解吸循环后,GP150对亚甲基蓝仍保持较高的去除率(88%),表明其具有优异的吸附性能、良好的可重复使用性以及在处理含亚甲基蓝污染水方面的潜在应用价值。