Guo Yuyan, Hasi Qi-Meige, Hu Sanshan, Jiang Shuai, Long Jiaxue, Xiao Chaohu, Zhang Yuhan, Chen Lihua
Key Laboratory of Environment-Friendly Composite Materials of the State Ethnic Affairs Commission, Gansu Province Engineering Research Center for Biomass Functional Composite Materials, Key Laboratory for the Utilization of Environment-Friendly Composite Materials and Biomass in University of Gansu Province, Gansu Province Research Center for Basic Sciences of Surface and Interface Chemistry, College of Chemical Engineering, Northwest Minzu University, Lanzhou 730124, China.
Center of Experiment, Northwest Minzu University, Lanzhou, Gansu 730124, P. R. China.
Langmuir. 2024 Nov 5;40(44):23382-23397. doi: 10.1021/acs.langmuir.4c02780. Epub 2024 Oct 22.
Developing adsorbent materials for the efficient removal of multiple organic pollutants in water is of importance technological significance. In the present work, a kind of conjugated microporous polymer (CMP) with a hollow sphere structure was constructed by applying SiO nanoparticles as a template and 1,3,5-triethynylbenzene (TEB) and 2,7-dibromocarbazole (27-DBCZ) as building blocks via the Sonogashira-Hagihara cross-coupling reaction. In order to further improve the dispersibility of the as-resulting CMPs in water, hydrophilic CMPs (H-S-CMPs) were obtained by a sulfonation modification. The adsorption performance of H-S-CMPs on dyes and antibiotics was investigated, which was based on different experimental parameters such as the initial concentration, contact time, temperature, pH, and adsorbent dose. The adsorption isotherm, kinetics, and thermodynamics were also studied, and the possible adsorption mechanism of H-S-CMPs was discussed. The experimental results illustrated that the adsorption process of H-S-CMPs on dyes and antibiotics is more consistent with the Langmuir isotherm model and the pseudo-second-order kinetic model. The maximum adsorption capacities of H-S-CMPs for rhodamine B (RhB), methylene blue (MB), ciprofloxacin, and norfloxacin were 206.2, 324.7, 222.2, and 216.9 mg/g, respectively, which were determined according to the Langmuir isothern model. In addition, the adsorption mechanism of H-S-CMPs may be attributed to the synergistic effects of hydrogen bonding, electrostatic attraction, π-π stacking, and pore filling. After 5 cycles, H-S-CMPs still maintained good stability, and their removal rate of dyes could reach more than 70%. Notably, this polymeric hollow microsphere has been less extensively investigated as an adsorbent for the removal of dyes and antibiotics. As a result, based on the designable flexibility of CMPs and the unique structure of hollow microspheres, the material holds great promise for wastewater treatment in the presence of multiple pollutants.
开发用于高效去除水中多种有机污染物的吸附材料具有重要的技术意义。在本工作中,以SiO纳米颗粒为模板,1,3,5-三乙炔基苯(TEB)和2,7-二溴咔唑(27-DBCZ)为结构单元,通过Sonogashira-Hagihara交叉偶联反应构建了一种具有空心球结构的共轭微孔聚合物(CMP)。为了进一步提高所得CMPs在水中的分散性,通过磺化改性获得了亲水性CMPs(H-S-CMPs)。研究了H-S-CMPs对染料和抗生素的吸附性能,该性能基于不同的实验参数,如初始浓度、接触时间、温度、pH值和吸附剂剂量。还研究了吸附等温线、动力学和热力学,并讨论了H-S-CMPs可能的吸附机理。实验结果表明,H-S-CMPs对染料和抗生素的吸附过程更符合Langmuir等温线模型和准二级动力学模型。根据Langmuir等温线模型确定,H-S-CMPs对罗丹明B(RhB)、亚甲基蓝(MB)、环丙沙星和诺氟沙星的最大吸附容量分别为206.2、324.7、222.2和216.9 mg/g。此外,H-S-CMPs的吸附机理可能归因于氢键、静电吸引、π-π堆积和孔隙填充的协同作用。经过5次循环后,H-S-CMPs仍保持良好的稳定性,其对染料的去除率可达70%以上。值得注意的是,这种聚合物空心微球作为去除染料和抗生素的吸附剂的研究较少。因此,基于CMPs的可设计灵活性和空心微球的独特结构,该材料在处理含有多种污染物的废水方面具有很大的潜力。