Green and sustainable fabrication of DES-pretreated high-strength densified wood.

UNLABELLED

Wood is a sustainable, benign, and high-performing green structural material readily available in nature that can be used to replace structural materials. However, insufficient mechanical performance (compared to metals and plastic), moisture sensitivity, and susceptibility to microorganism attack make it challenging to use wood as it is for advanced engineering applications. We here present an efficient approach to fabricating densified wood with minimal time and waste generation, demonstrating high mechanical strength, and decreased water penetration on the surface. Wood slabs were treated with deep eutectic solvents (DESs) to solubilize the lignin, followed by in-situ regeneration of dissolved lignin in the wood. Then, the slabs were densified with heat and pressure, turning the wood into a functionalized densified material. Lignin regeneration and morphological changes were observed via two-photon microscopy and Scanning Electron Microscopy (SEM), respectively. The final product is less susceptible to water absorption on the surface and has enhanced flexural strength (> 50% higher), surface hardness (100% increased), and minimal set recovery compared to natural wood. The improved mechanical performance is due to regenerated lignin which acts as a glue and fills spaces present within the interconnected cellulose network inside the wood, forming a highly dense composite during densification. Such enhancement in the properties of DES-densified wood composite makes it a favorable candidate for advanced structural and engineering applications.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s00226-024-01594-7.