Bioremediation of metal cyanide complexes from electroplating wastewater for long-term application using SUTS 1 and SUTS 2.

The purpose of this study was to investigate the optimum conditions, including aerobic and anoxic conditions, for operating a long-term bioreactor system to decrease the toxicity of industrial electroplating wastewater effluents containing metal cyanide using SUTS 1 and SUTS 2. The initial results revealed that bacteria performed better under aerobic conditions than under anoxic conditions. An aerobic bioreactor system was subsequently set up in a long-term study lasting 30 days under optimum operating conditions. Both mixed-culture bacteria and indigenous bacteria promoted the high-efficiency treatment of cyanide and metals in the first 7 days of the study. When the system had high removal rates, cyanide removal was greater than that of zinc, copper, nickel, and chromium (CN > Zn > Cu > Ni > Cr), with removal efficiencies of 96.67%, 93.93%, 74.17%, 63.43%, and 44.65%, respectively, with residual concentrations of 0.15 ± 0.01, 0.24 ± 0.005, 0.03 ± 0.002, 18.41 ± 0.06 and 14.26 ± 0.15 mg/L, respectively. The cell concentration in the bioreactor increased to approximately 10 CFU/mL over 30 days from initial cell concentrations of 6.15 × 10 CFU/mL and 1.05 × 10 CFU/mL for the mixed culture and indigenous inoculation, respectively. These results implied that the bacteria were resistant to heavy metal toxicity. The addition of an appropriate carbon source with sufficient aeration to a bioreactor resulted in increased cyanide degradation.