Mantovani Felipe B, Faggion Heloísa Z, Soni Jamil F, Valenza Weverley R, Klipp Matheus U S, Uliana Christiano S
Department of Orthopedics and Traumatology, Hospital do Trabalhador, Curitiba, PR, Brazil.
Eur J Orthop Surg Traumatol. 2024 Dec 12;35(1):37. doi: 10.1007/s00590-024-04154-8.
Pelvic ring fractures are rare in the pediatric population and can be treated using sacroiliac screws when needed. The aim of this study was to identify safe anatomical corridors for sacroiliac fixation in different pediatric age groups and also to determine the prevalence of sacral dysmorphism in the study sample.
We measured the dimensions of the horizontal and oblique S1 corridors and the horizontal S2 corridor in pelvic computed tomography scans of 138 children aged 1 to 16 years. The patients were divided into three groups (Group 1, 1-6 years old, Group 2, 6-11 years old; and Group 3, 11-16 years old) to identify safe corridors in each age group. We compared the corridors in terms of cross-sectional areas and estimated the prevalence of dysmorphic sacral bones in the study sample.
Data are presented as medians. For each group, the height, depth, and length were, respectively: Group 1: 9.1 mm, 13.9 mm, and 47 mm; Group 2: 13.5 mm, 15.7 mm, and 55 mm; and Group 3: 15.7 mm, 16.8 mm, and 72 mm. The prevalence of sacral dysmorphism was high (44.2%).
In Group 3, 7.0 mm screws were safe in all three corridors. For Group 2, the oblique S1 corridor could accommodate 7.0 mm screws, whereas in the other studied corridors, the 3.5 mm screw would be better indicated. For Group 1, the oblique S1 corridor was best suited, and only for the 3.5 mm screw.
骨盆环骨折在儿科人群中较为罕见,必要时可使用骶髂螺钉进行治疗。本研究的目的是确定不同儿科年龄组中骶髂固定的安全解剖通道,并确定研究样本中骶骨畸形的发生率。
我们在138例1至16岁儿童的骨盆计算机断层扫描中测量了水平和斜向S1通道以及水平S2通道的尺寸。将患者分为三组(第1组,1至6岁;第2组,6至11岁;第3组,11至16岁),以确定每个年龄组的安全通道。我们比较了通道的横截面积,并估计了研究样本中骶骨畸形的发生率。
数据以中位数表示。每组的高度、深度和长度分别为:第1组:9.1毫米、13.9毫米和47毫米;第2组:13.5毫米、15.7毫米和55毫米;第3组:15.7毫米、16.8毫米和72毫米。骶骨畸形的发生率很高(44.2%)。
在第3组中,7.0毫米的螺钉在所有三个通道中都是安全的。对于第2组,斜向S1通道可容纳7.0毫米的螺钉,而在其他研究通道中,3.5毫米的螺钉更适用。对于第1组,斜向S1通道最适合,且仅适用于3.5毫米的螺钉。