Zhang Cheng, Zhang Ze, Tian Yao, Yu Lingmin, Wang Hairong
State Key Laboratory for Manufacturing Systems Engineering, Xi'an 710049, China.
School of Mechanical Engineering, Xi'an Jiaotong University, Xi'an 710049, China.
Sensors (Basel). 2024 Dec 7;24(23):7823. doi: 10.3390/s24237823.
As a VOC, ethanol can be found in human exhaled breath, and its concentration can be used as a biomarker of human liver disease. To detect trace-level concentrations of ethanol, an ultrasensitive ethanol sensor was developed based on a dual-nanoparticle InO/SnO composite that was prepared by hydrothermal synthesis, and its suspension was dipped on a flat electrode to form a gas sensor. The nanocomposite was characterized by an SEM (scanning electron microscope), XRD (X-ray diffraction), and a TEM (transmission electron microscope), and the nanoparticle structure was observed. The experimental results showed that gas sensors based on the InO/SnO nanocomposite had higher responses compared to sensors based on pure InO. Among the nanocomposites, the one with a InO-to-SnO mol ratio of 1:8 was used in the sensor with the highest response of 1.41 to 100 ppb ethanol at 150 °C, which also exhibited good repeatability. The ultrasensitive response to ethanol can be attributed to the faster electron migration rate and the increase in oxygen-absorbing sites caused by the n-n heterojunction in the nanocomposite. Due to its low detection limit, good repeatability, and relatively high responses in high humidity, this sensor has a potential application in exhaled breath detection.
作为一种挥发性有机化合物(VOC),乙醇可在人体呼出的气体中检测到,其浓度可作为人类肝脏疾病的生物标志物。为了检测痕量浓度的乙醇,基于通过水热合成制备的双纳米颗粒InO/SnO复合材料开发了一种超灵敏乙醇传感器,其悬浮液被滴涂在平面电极上以形成气体传感器。通过扫描电子显微镜(SEM)、X射线衍射(XRD)和透射电子显微镜(TEM)对该纳米复合材料进行了表征,并观察到了纳米颗粒结构。实验结果表明,基于InO/SnO纳米复合材料的气体传感器比基于纯InO的传感器具有更高的响应。在这些纳米复合材料中,InO与SnO摩尔比为1:8的复合材料用于传感器,该传感器在150℃下对100 ppb乙醇的最高响应为1.41,并且还表现出良好的重复性。对乙醇的超灵敏响应可归因于纳米复合材料中n-n异质结导致的更快的电子迁移速率和吸氧位点的增加。由于其低检测限、良好的重复性以及在高湿度下相对较高的响应,该传感器在呼出气体检测中具有潜在的应用。