Zheng Yi, Yang Bin, Meng Decheng, Wang Zhijie, Pan Naihao, Feng Chen, Wang Juan
Department of Orthopedic Surgery, The 3rd Hospital of Hebei Medical University, Hebei, Shijiazhuang, 050051, P.R. China.
Xiongan Xuanwu Hospital, Xiongan New Area, Hebei, 070001, P.R. China.
BMC Musculoskelet Disord. 2025 Jan 2;26(1):7. doi: 10.1186/s12891-024-08258-4.
It is known that open wedge high tibial osteotomy (OWHTO) may lead to progression of patellofemoral degeneration due to descent of the patellar height. However, the difference in patellofemoral joint (PFJ) loads with normal daily activity between uniplane and biplane osteotomies is unclear. The purpose of this study was to reveal the differences in PFJ biomechanics between uniplane and biplane OWHTO using finite element analysis (FEA).
In this study, a finite element model of the knee joint was established using computed tomography (CT) and magnetic resonance imaging (MRI) data from a healthy volunteer, and a 10° varus deformity of the proximal tibia was simulated. Under the guidance of experienced orthopedic surgeons, simulations of both uniplane and biplane open wedge high tibial osteotomy procedures were conducted. The maximum stress and contact area of the PFJ at knee flexion angles of 90°, 60°, 30°, and 0° during sitting-to-standing and walking were measured in the three finite element models (normal knee joint model, uniplane OWHTO model, and biplane OWHTO model).
In all models, the peak value of von-mises stress (VMS) occurred at 90 degrees of knee flexion. At 90 degrees of knee flexion, the biplane OWHTO model exhibited the highest PFJ stress, measuring 9.664 MPa. As the knee joint extended from 90 degrees of flexion to 0 degrees of extension, the PFJ stress gradually decreased in all three models. The decrease was most pronounced in the uniplane OWHTO model, although it remained higher than in the normal model.
Uniplane OWHTO would induce lower contact stress and larger contact area on the patellofemoral surface than biplane OWHTO during walking and sitting-to-standing, which may cause less mechanical pain and secondary damage to the articular cartilage. Therefore, uniplane OWHTO might be a better option for patients with anterior knee pain and/or PFJ degeneration.
已知开放性楔形高位胫骨截骨术(OWHTO)可能由于髌骨高度下降而导致髌股关节退变进展。然而,单平面和双平面截骨术在正常日常活动中髌股关节(PFJ)负荷的差异尚不清楚。本研究的目的是使用有限元分析(FEA)揭示单平面和双平面OWHTO之间PFJ生物力学的差异。
在本研究中,使用来自一名健康志愿者的计算机断层扫描(CT)和磁共振成像(MRI)数据建立膝关节有限元模型,并模拟近端胫骨10°内翻畸形。在经验丰富的骨科医生指导下,进行单平面和双平面开放性楔形高位胫骨截骨术的模拟。在三个有限元模型(正常膝关节模型、单平面OWHTO模型和双平面OWHTO模型)中,测量坐立和行走过程中膝关节屈曲角度为90°、60°、30°和0°时PFJ的最大应力和接触面积。
在所有模型中,von-mises应力(VMS)峰值出现在膝关节屈曲90°时。在膝关节屈曲90°时,双平面OWHTO模型的PFJ应力最高,为9.664MPa。随着膝关节从屈曲90°伸展到伸展0°,所有三个模型中的PFJ应力逐渐降低。单平面OWHTO模型中的降低最为明显,尽管仍高于正常模型。
在行走和坐立过程中,单平面OWHTO在髌股表面诱导的接触应力低于双平面OWHTO,接触面积更大,这可能导致较少的机械性疼痛和对关节软骨的继发性损伤。因此,对于有膝前疼痛和/或PFJ退变的患者,单平面OWHTO可能是更好的选择。