Suppr超能文献

Two types of cannulated screw fixation based on Letenneur classification for the treatment of Hoffa fracture: A finite element analysis.

作者信息

Jia Peng, Chang Xiaohu, Tang Xin

机构信息

Department of Orthopedics, First Affiliated Hospital of Dalian Medical University, Dalian, Liaoning 116011, China; Department of Orthopaedic Trauma, Shandong Second Provincial General Hospital, Jinan, Shandong 250023, China.

Department of Orthopedics, First Affiliated Hospital of Dalian Medical University, Dalian, Liaoning 116011, China.

出版信息

J Orthop Sci. 2025 Sep;30(5):856-862. doi: 10.1016/j.jos.2024.11.012. Epub 2025 Jan 3.

Abstract

PURPOSE

A finite element analysis was performed to simulate the biomechanical differences between anterior-posterior (AP) direction and posterior-anterior (PA) direction placement of two cannulated screws in Hoffa fractures.

METHODS

Computed tomography images of an healthy male volunteer were used to simulate Letenneur Ⅰ, Ⅱa, Ⅱb, Ⅱc, Ⅲ Hoffa fractures, and two groups of screw internal fixation models were constructed. Two 6.5 mm cannulated screws were implanted parallel in the AP direction or the PA direction. The biomechanical test was performed to determine the displacement, stress distribution, and peaks in the distal femur and cannulated screws in 10 models.

RESULTS

The displacement distribution and peak values of the distal femur and cannulated screws in both groups were similar, and displacement increasing as the load increased. The stress distribution in the distal femur was similar between the two groups, with stress mainly concentrated on both sides of the fracture line, the posterolateral and anterior aspects of the femoral shaft. The peak stress in the PA group of the Letenneur type Ⅱb was significantly higher than that in the AP group, and the stress in the distal femur increased with increasing load. The stress distribution in the cannulated screws of Letenneur Ⅰ, Ⅱa, Ⅱb, and Ⅲ, was similar, but differences are observed between the two groups in type Ⅱc. The stress in the cannulated screws increased with increasing load, and the peak values in the PA group are significantly higher than those in the AP group.

CONCLUSION

The mechanical stability of the two screw insertion methods is similar. Inserting screws from anterior to posterior can reduce the stress on the distal femur and cannulated screws, and also minimize the dissection of the posterior soft tissues. Therefore, inserting screws from anterior to posterior is a more recommended surgical approach for Hoffa fractures.

摘要

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验