DeLancey John O L, Mastrovito Sara, Masteling Mariana, Hong Christopher X, Ashton-Miller James A, Chen Luyun
Department of Obstetrics and Gynecology, University of Michigan, Ann Arbor, MI.
Department of Obstetrics and Gynecology, Fondazione Policlinico Universitario Agostino Gemelli IRCCS, Rome, Italy.
Am J Obstet Gynecol. 2025 Jul;233(1):47.e1-47.e12. doi: 10.1016/j.ajog.2025.01.011. Epub 2025 Jan 10.
A large urogenital hiatus in level III results in a higher risk of developing pelvic organ prolapse after birth and failure after prolapse surgery. Deepening of the pelvic floor and downward rotation of the levator plate have also been linked to prolapse. Currently we lack data that evaluates how these measures relate to one another and to prolapse occurrence and size.
This study uses measurements from a published conceptual model to compare women with and without prolapse to determine the magnitude of difference between cases and controls and to quantify the interrelationships among different aspects of pelvic floor shape and structure.
Ninety-one women with anterior predominant prolapse and uterus in situ who had 3D MRI and 30 similar women with normal support were studied. Resting scans were used to avoid the influence of the prolapse dilating the hiatus. Measurements assessed 3 domains: hiatus size (urogenital and levator hiatus); length of the surrounding pelvic floor muscles (pubovisceral, puborectal, iliococcygeal muscles); the shelf-like posterior pelvic floor (levator plate shape, levator bowl volume), and bony pelvic dimensions. Effect sizes were calculated and principal component shape analysis performed to evaluate levator plate shape. z scores were calculated and a value greater than 1.68 (95th percentile) was considered the "failure" criterion. Frequency and severity of structural support site failure were analyzed by prolapse size.
Resting urogenital and levator hiatal areas were 68% and 59% larger in the prolapse group compared to controls. These area enlargements were 2 to 4 times larger than the anterior-posterior dimension enlargements (urogenital hiatus 36%; levator hiatus 13%). The greatest muscle length differences between groups occurred in the pubovisceral (34%) and puborectal (25%) muscles compared to the iliococcygeal muscle (8%)-roughly half the area differences. Levator bowl volume was 63% deeper with prolapse. Urogenital hiatus and levator hiatus areas were strongly correlated with pubovisceral and puborectal muscle length (0.7-0.8), while iliococcygeal muscle length had lower correlations (0.4-0.5). Levator bowl volume correlated strongly with hiatal enlargement (0.7-0.8) and muscle length (pubovisceral and puborectal muscles), moderately so with levator plate and iliococcygeal muscle, and weakly with bony dimension. Failure frequency increased with prolapse size for urogenital hiatus anterior-posterior (P=.001) and area (P=.019). By contrast, levator hiatus area was similar for all prolapse sizes (P=.288), while levator hiatus anterior-posterior failure was more common in larger prolapses (P=.018) but with smaller percentages of failure than levator hiatus area (P<.01). Both levator bowl volume (P=.015) and levator plate (P=.045) trended toward increasing failure with larger prolapse sizes. Among women with enlarged urogenital hiatus at straining, 43% and 28% had normal urogenital hiatus anterior-posterior and area at rest, respectively.
Changes in the shape and dimensions of the pelvic floor are complex and are not captured by a single measure (such as the urogenital hiatus anterior-posterior dimension, which does not capture its lateral expansion). The failure patterns were different between small and large prolapses. Understanding why could lead to improved prevention and treatments for level III failures.
Ⅲ度大泌尿生殖裂孔会增加产后发生盆腔器官脱垂及脱垂手术后失败的风险。盆底加深和提肌板向下旋转也与脱垂有关。目前,我们缺乏评估这些指标之间的相互关系以及与脱垂发生和大小之间关系的数据。
本研究使用已发表概念模型中的测量方法,比较有和没有脱垂的女性,以确定病例与对照之间的差异程度,并量化盆底形状和结构不同方面之间的相互关系。
对91例以膀胱膨出为主且子宫在位的女性进行了三维磁共振成像(3D MRI)检查,另有30例具有正常盆底支持的类似女性作为对照。使用静息扫描以避免脱垂导致裂孔扩张的影响。测量评估了3个方面:裂孔大小(泌尿生殖裂孔和提肌裂孔);周围盆底肌肉的长度(耻骨内脏肌、耻骨直肠肌、髂尾肌);盆底下部类似搁板的结构(提肌板形状、提肌碗容积)以及骨盆骨骼尺寸。计算效应量并进行主成分形状分析以评估提肌板形状。计算z值,z值大于1.68(第95百分位数)被视为“失败”标准。根据脱垂大小分析结构支持部位失败的频率和严重程度。
与对照组相比,脱垂组静息时泌尿生殖裂孔和提肌裂孔面积分别增大68%和59%。这些面积增大比前后径增大(泌尿生殖裂孔36%;提肌裂孔13%)大2至4倍。两组之间肌肉长度差异最大的是耻骨内脏肌(34%)和耻骨直肠肌(25%),而髂尾肌差异为8%,约为面积差异的一半。脱垂时提肌碗容积深63%。泌尿生殖裂孔和提肌裂孔面积与耻骨内脏肌和耻骨直肠肌长度密切相关(0.7 - 0.8),而髂尾肌长度相关性较低(0.4 - 0.5)。提肌碗容积与裂孔增大(0.7 - 0.8)和肌肉长度(耻骨内脏肌和耻骨直肠肌)密切相关,与提肌板和髂尾肌中度相关,与骨骼尺寸弱相关。泌尿生殖裂孔前后径(P = 0.001)和面积(P = 0.019)的失败频率随脱垂大小增加。相比之下,所有脱垂大小的提肌裂孔面积相似(P = 0.288),而提肌裂孔前后径失败在较大脱垂中更常见(P = 0.018),但失败百分比低于提肌裂孔面积(P < 0.01)。提肌碗容积(P = 0.015)和提肌板(P = 0.045)均随脱垂大小增加而失败趋势增加。在用力时泌尿生殖裂孔增大的女性中,分别有43%和28%的人静息时泌尿生殖裂孔前后径和面积正常。
盆底形状和尺寸的变化很复杂,无法通过单一测量指标(如泌尿生殖裂孔前后径,它无法反映其横向扩张)来体现。小脱垂和大脱垂的失败模式不同。了解其原因可能会改善Ⅲ度失败的预防和治疗。