Suppr超能文献

吐温20对琼脂凝胶物理性质和结构的影响

The Impact of Tween 20 on the Physical Properties and Structure of Agar Gel.

作者信息

Jakubczyk Ewa, Kamińska-Dwórznicka Anna, Kot Anna

机构信息

Department of Food Engineering and Process Management, Institute of Food Sciences, Warsaw University of Life Sciences, 02-776 Warsaw, Poland.

Department of Functional and Organic Food, Institute of Human Nutrition Sciences, Warsaw University of Life Sciences, 02-776 Warsaw, Poland.

出版信息

Gels. 2025 Feb 23;11(3):159. doi: 10.3390/gels11030159.

Abstract

This study aimed to evaluate the effect of different concentrations of Tween 20 on various physical properties of agar gel as a model material. The effects of other sources of agar-agar powder on the gel properties were also evaluated. The pure gels were prepared with agar powders obtained from two suppliers. Also, agar gels with Tween 20 in the 0.10 to 0.70% range were produced. The measurement of density, water activity, maximal force at fracture and gelling temperature, and the agar gels' rheological properties, showed that the gels prepared with different agar powders had similar properties. The syneresis and stability indexes, gas hold-up, mechanical and acoustic attributes, and structure of foamed gels with Tween 20 were measured. The addition of Tween 20 in amounts ranging from 0.10 to 0.35% contributed to a gradual decrease in the stability and mechanical parameters of the gels. Using a concentration of 0.7%, Tween was able to obtain foamed gels with a uniform structure and small pore size, but low hardness and gumminess. Application of a lower concentration of Tween of 0.1% produced more rigid gels with limited gel syneresis. Adding Tween 20 at the appropriate level can be a factor in obtaining gels with a tailored structure and texture.

摘要

本研究旨在评估不同浓度的吐温20对作为模型材料的琼脂凝胶各种物理性质的影响。还评估了其他来源的琼脂粉对凝胶性质的影响。用从两个供应商处获得的琼脂粉制备纯凝胶。此外,还制备了吐温20含量在0.10%至0.70%范围内的琼脂凝胶。对密度、水分活度、断裂时的最大力和胶凝温度以及琼脂凝胶的流变性质进行测量,结果表明,用不同琼脂粉制备的凝胶具有相似的性质。测量了吐温20存在下泡沫凝胶的脱水收缩和稳定性指标、气体滞留率、机械和声学属性以及结构。添加0.10%至0.35%的吐温20会导致凝胶的稳定性和机械参数逐渐降低。使用0.7%的浓度,吐温能够获得结构均匀、孔径小但硬度和黏性低的泡沫凝胶。使用0.1%的较低浓度吐温会产生脱水收缩有限的更坚硬凝胶。在适当水平添加吐温20可能是获得具有定制结构和质地的凝胶的一个因素。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/46e5/11942530/fa17da7fc35a/gels-11-00159-g001.jpg

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验