Meng Yanhua, Liu Xinchao, Wu Qiufang, Chen Weihao, Chen Wei, Zhang Yifan, Du Xintao, Han Yuxing
Anyang Institute of Technology, Anyang, Henan Province 455000, China.
South China Agricultural University, Wushan Street Five Road No. 483, Guangzhou 510642, Guangdong, China.
ACS Omega. 2025 Mar 18;10(12):11994-12001. doi: 10.1021/acsomega.4c09553. eCollection 2025 Apr 1.
In agricultural production, the application of pesticides via spraying is an effective approach to controlling pests and diseases. However, the pesticide utilization efficiency in peanut fields is generally low, owing to factors such as crop-specific characteristics and the nonoptimal use of adjuvants. To enhance the spreading performance of droplets on the surface of peanut leaves and increasing pesticide utilization efficiency, in this study, the effects of leaf surface characteristics and three different types of tank-mixed adjuvants on the droplet-spreading characteristics of peanut leaves were comprehensively analyzed. The results indicate that structural differences exist between the adaxial and abaxial surfaces of peanut leaves, leading to varying degrees of hydrophobicity. The adaxial surface is covered with a uniform, erect, waxy crystal structure, which increases the surface roughness and consequently enhances hydrophobicity. On the Adaxial of peanut leaves have higher CA and lower SA. While tank-mix adjuvants can improve the wetting and spreading performance of droplets on peanut leaves, the efficacy of the methylated plant oil adjuvant Beidatong (BDT) and the mineral oil adjuvant VELEZIA PRO (VP) is limited. In contrast, organosilicon adjuvant Nongjianfei (NJF) effectively improved the wettability of peanut leaf surfaces. Specifically, the addition of NJF can significantly reduce the surface tension of the spray solution, dissolve the waxy structure on the surface of peanut leaves, and greatly enhance the spreading performance of droplets on those leaves. On the adaxial leaf surface, the contact angle (CA) of the droplet rapidly reached 0°, and the droplet-spreading area (SA) increased by 150 times. On the abaxial leaf surface, the effect of NJF was relatively weaker, where the CA was 16.5° and the SA increased by 3.8 times. Therefore, in peanut field applications, incorporating the tank-mix adjuvant NJF can greatly enhance the spreading and retention of pesticides on peanut leaf surfaces, thereby improving pesticide utilization efficiency.
在农业生产中,通过喷雾施用农药是防治病虫害的有效方法。然而,由于作物特定特性和助剂使用不当等因素,花生田的农药利用效率普遍较低。为了提高液滴在花生叶片表面的铺展性能并提高农药利用效率,本研究综合分析了叶片表面特性和三种不同类型的桶混助剂对花生叶片液滴铺展特性的影响。结果表明,花生叶片的正面和背面存在结构差异,导致疏水性程度不同。正面覆盖着均匀、直立的蜡质晶体结构,增加了表面粗糙度,从而增强了疏水性。花生叶片正面具有较高的接触角(CA)和较低的铺展面积(SA)。虽然桶混助剂可以改善液滴在花生叶片上的湿润和铺展性能,但甲基化植物油助剂倍达通(BDT)和矿物油助剂威利斯亚PRO(VP)的效果有限。相比之下,有机硅助剂农健飞(NJF)有效地改善了花生叶片表面的润湿性。具体而言,添加NJF可以显著降低喷雾溶液的表面张力,溶解花生叶片表面的蜡质结构,并大大提高液滴在这些叶片上的铺展性能。在叶片正面,液滴的接触角(CA)迅速达到0°,液滴铺展面积(SA)增加了150倍。在叶片背面,NJF的效果相对较弱,接触角为16.5°,铺展面积增加了3.8倍。因此,在花生田应用中,加入桶混助剂NJF可以大大提高农药在花生叶片表面的铺展和滞留,从而提高农药利用效率。