Kumar Ranbir, Shikha Deep, Anand Smit, Sinha Sanjay Kumar, Mohanty Paresh Kumar, Mhaske Sanjay, Kumar Abhinandan, Mukhopadhyay Arkadeb
Department of Chemistry, Birla Institute of Technology, Mesra, Ranchi, Jharkhand 835215, India.
Department of Physics, Birla Institute of Technology, Mesra, Ranchi, Jharkhand 835215, India.
ACS Biomater Sci Eng. 2025 May 12;11(5):2622-2638. doi: 10.1021/acsbiomaterials.4c02471. Epub 2025 Apr 29.
The research investigates the integration of 3% silver-doped hydroxyapatite (Ag-HAP) onto a hexagonal alumina substrate with a matching structure to reduce interface strain utilizing radio frequency magnetron sputtering (RFMS). This method aims to improve film adhesion while enhancing the bioactivity, antimicrobial properties, and wear resistance of biomedical implants. Hydroxyapatite (HAP) has excellent biocompatibility and is widely used in bone implants due to its similarity to bone minerals, but it suffers from brittleness and limited mechanical strength. By doping Ag with HAP, mechanical and antimicrobial properties are enhanced, addressing infection and material longevity challenges. Alumina (AlO) is known for its mechanical strength and wear resistance, making it a suitable substrate for implants; however, its lack of bioactivity requires modification. The RFMS technique ensures a uniform and well-adhered nanocoating of Ag-HAP on alumina, creating a composite material that balances alumina's durability with silver-doped HAP bioactivity and antimicrobial benefits. The study reveals improved mechanical properties, such as increased hardness and wear resistance, along with enhanced antibacterial efficacy, making the composite material promising for orthopedic applications. The characterization of coatings using various analytical techniques such as EDS, FESEM, FTIR, and XRD confirms the formation and stability of Ag-HAP, while electrical properties are described by dielectric measurements. The changes in the lattice parameters, grain size, and pore size led to changes in hardness, coefficient of friction, and ultimately, the material's biocompatibility. Improvement in corrosion resistance after coating can be due to intermetallic compound formation at the interface. Biocompatibility was studied through assays that show favorable results, supporting the potential of Ag-HAP/AlO in implantology. The mechanism of improvement in the antibacterial mechanism against and is proposed. This research proposes a novel solution to implant-related challenges by combining silver-doped hydroxyapatite mechanical and biological advantages with alumina, thereby optimizing both biocompatibility and structural integrity for long-term use in biomedical implants.
该研究利用射频磁控溅射(RFMS)技术,将3%银掺杂羟基磷灰石(Ag-HAP)整合到具有匹配结构的六方氧化铝基底上,以减少界面应变。该方法旨在提高薄膜附着力,同时增强生物医学植入物的生物活性、抗菌性能和耐磨性。羟基磷灰石(HAP)具有优异的生物相容性,由于其与骨矿物质相似,被广泛用于骨植入物,但它存在脆性和机械强度有限的问题。通过将银掺杂到HAP中,机械性能和抗菌性能得到增强,解决了感染和材料寿命的挑战。氧化铝(AlO)以其机械强度和耐磨性而闻名,使其成为植入物的合适基底;然而,其缺乏生物活性需要进行改性。RFMS技术确保了Ag-HAP在氧化铝上形成均匀且附着力良好的纳米涂层,从而创造出一种复合材料,该复合材料平衡了氧化铝的耐久性与银掺杂HAP的生物活性和抗菌益处。研究表明,该复合材料的机械性能得到改善,如硬度和耐磨性增加,同时抗菌效果增强,使其在骨科应用中具有广阔前景。使用各种分析技术(如EDS、FESEM、FTIR和XRD)对涂层进行表征,证实了Ag-HAP的形成和稳定性,而电学性能则通过介电测量来描述。晶格参数、晶粒尺寸和孔径的变化导致硬度、摩擦系数的变化,最终影响材料的生物相容性。涂层后耐腐蚀性的提高可能是由于界面处形成了金属间化合物。通过实验研究生物相容性,结果显示良好,支持了Ag-HAP/AlO在植入学中的潜力。提出了针对 和 的抗菌机制改善的机制。本研究通过将银掺杂羟基磷灰石的机械和生物学优势与氧化铝相结合,为植入相关挑战提出了一种新颖的解决方案,从而优化生物相容性和结构完整性,以便在生物医学植入物中长期使用。