Suppr超能文献

前交叉韧带重建:同种异体四股肌腱ACL重建的三切口技术

Anterior Cruciate Ligament Reconstruction: 3-Incision Technique With Allograft Quad Tendon ACL Reconstruction.

作者信息

Stone Kevin R

机构信息

The Stone Clinic, Stone Research Foundation, San Francisco, California, USA.

出版信息

Video J Sports Med. 2024 Mar 19;4(2):26350254231206141. doi: 10.1177/26350254231206141. eCollection 2024 Mar-Apr.

Abstract

BACKGROUND

Anterior cruciate ligament (ACL) ruptures are becoming more common in younger and older athletes. Approximately 250,000 ACL injuries occur each year, requiring the need for an effective and reproducible surgical technique.

INDICATIONS

The 3-incision outside-in technique utilizes the donor quadriceps tendon, an extraordinarily strong graft, without damage from autogenous harvesting of patellar tendon or hamstrings. While some data suggest higher re-rupture risk with donor tissue, this is counterbalanced by avoiding secondary surgical site damage.

TECHNIQUE DESCRIPTION

The ruptured ACL is removed and the intercondylar notch is cleaned to visualize the anatomical ACL insertion site. Using the 3-tunnel technique a gaff is passed through the intercondylar notch, through a puncture hole (incision 1) and a rear entry guide hooked to its tip. The guide point is pulled into the knee and placed in posterior aspect of the anatomic footprint of the native ACL. Through incision 2, a guide pin is drilled to this point and overdrilled with a 10-mm drill. The edges of the hole in the intercodylar notch are smoothed with a currette. The tibial footprint is cleared, a tibial aiming guide placed. Through incision 3, a guide pin is placed and over drilled with a 10-mm drill followed by a Gore-Tex reamer to ensure no impingement would inhibit graft passage. The proximal bone of a quadriceps tendon graft is sized through a 10-mm sizer and compacted. Two holes are drilled to hold sutures for the proximal aspect of the femoral graft. The quadriceps tendon graft is sized to fit through a 9-mm tunnel and the free end whipped with a stitch before being passed from outside-in through the smoothed tunnels. The femoral bone block is tapped to have a press fit initially and then is fixed with a Milagro screw. The knee is cycled ten times to remove slack and the interference fit guide pin is placed on the anterior aspect of the graft, and fixed with the knee at 15° to 30° of flexion. Stability is tested with confirmation of no impingement, and then an extra-articular reconstruction with a semitendinosus allograft is performed. The extra articular reconstruction is placed at the point between Gerdy's tubercle and the fibular head, passed under the skin and the iliotibial band, and then inserted just anterior and superior to the ACL femoral drill hole.

RESULTS

Patient outcomes in our initial experience are comparable to our autogenous bone-tendon-bone (BTB) procedures without anterior knee pain. Return to sport is similar with autogenous procedures, with a delay of 6 to 12 months. In addition, there is a possibility for acceleration of healing with the addition of platelet-rich plasma and hyaluronic acid between 1 and 3 months postsurgery. We have insufficient data so far to determine if the re-rupture rate will decline compared with reported outcomes.

CONCLUSION

The 3-incision technique with allograft quadriceps tendon for ACL reconstruction is a reproducible surgical technique that avoids harvest from the patient's own body.

PATIENT CONSENT DISCLOSURE STATEMENT

The author(s) attests that consent has been obtained from any patient(s) appearing in this publication. If the individual may be identifiable, the author(s) has included a statement of release or other written form of approval from the patient(s) with this submission for publication.

摘要

背景

前交叉韧带(ACL)断裂在年轻和年长运动员中越来越常见。每年约有25万例ACL损伤,需要一种有效且可重复的手术技术。

适应症

三切口由外向内技术使用供体股四头肌腱,这是一种非常强壮的移植物,不会因自体髌腱或腘绳肌取材而受损。虽然一些数据表明使用供体组织再断裂风险较高,但通过避免二次手术部位损伤可予以抵消。

技术描述

切除断裂的ACL,清理髁间切迹以显露解剖学上的ACL附着部位。采用三隧道技术,将一根探针穿过髁间切迹、一个穿刺孔(切口1),并在其尖端连接一个后方入路导向器。将导向器尖端拉入膝关节并置于原ACL解剖足迹的后方。通过切口2,在此处钻一根导针,并用10毫米钻头扩钻。用刮匙将髁间切迹处的孔边缘修平。清理胫骨足迹,放置胫骨瞄准导向器。通过切口3,放置一根导针并用10毫米钻头扩钻,随后用Gore-Tex扩孔钻确保无撞击阻碍移植物通过。股四头肌腱移植物的近端骨块通过10毫米尺寸器测量并压实。钻两个孔以固定股部移植物近端的缝线。股四头肌腱移植物尺寸调整为能穿过9毫米隧道,游离端在从外向内穿过修平的隧道之前用缝线缝合。对股骨骨块进行敲击使其初步压配,然后用Milagro螺钉固定。膝关节屈伸10次以消除松弛,将干涉配合导针置于移植物前方,膝关节屈曲15°至30°时固定。确认无撞击后测试稳定性,然后用半腱肌同种异体移植物进行关节外重建。关节外重建置于Gerdy结节与腓骨头之间的位置,从皮下和髂胫束下方穿过,然后插入到ACL股骨钻孔的前上方。

结果

我们初步经验中的患者结果与我们无膝前疼痛的自体骨-肌腱-骨(BTB)手术相当。恢复运动的情况与自体手术相似,延迟6至12个月。此外,术后1至3个月添加富含血小板血浆和透明质酸有可能加速愈合。目前我们的数据不足,无法确定与已报道结果相比再断裂率是否会下降。

结论

采用同种异体股四头肌腱的三切口技术用于ACL重建是一种可重复的手术技术,可避免取自患者自身身体。

患者知情同意披露声明

作者证明已获得本出版物中出现的任何患者的同意。如果个体可被识别,作者已随本投稿附上患者的豁免声明或其他书面批准形式以供发表。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/b219/11997142/3a1693967749/10.1177_26350254231206141-img1.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验