Suppr超能文献

自体股四头肌腱骨移植及股骨压配固定的前交叉韧带重建技术

Technique of ACL Reconstruction With Autologous Quadriceps Tendon Bone Graft and Femoral Press Fit Fixation.

作者信息

Petersen Wolf, Ohde Julia, Karpinski Katrin, Bierke Sebastian, Häner Martin

机构信息

Martin Luther Hospital, Berlin, Germany.

出版信息

Video J Sports Med. 2022 Nov 24;2(6):26350254221122506. doi: 10.1177/26350254221122506. eCollection 2022 Nov-Dec.

Abstract

BACKGROUND

Recently, there has been an increase in interest in the quadriceps tendon (QT) as an alternative autologous graft option for primary anterior cruciate ligament (ACL) reconstruction.

INDICATION

Anterior cruciate ligament reconstruction in skeletally mature patients (high-risk patients for re-rupture and patients with medial instability).

TECHNIQUE DESCRIPTION

The QT graft is harvested with a 4-cm skin incision over the superior pole of the patella. A double knife and an oscillating saw are used to obtain the QT graft with a bone block from the patella (65 mm x 10 mm graft and 15 mm bone block). Then an arthroscopy is carried out with assessment of the ACL tear and treatment of further intraarticular injuries. ACL reconstruction begins with debridement of the femoral insertion to expose the land marks. The medial portal is used for femoral tunnel drilling with the knee in more than 110° of flexion. A special portal aiming device is introduced via the anteromedial portal and a guide wire is placed in the area of the femoral anteromedial insertion. This guide wire is gradually overdrilled with various drills and dilators of increasing size. The final diameter should be 0.5 mm smaller than the diameter of the bone block of the graft to allow for press-fit fixation. Then, the tibial tunnel is drilled using a tibial drill guide leaving the tibial stump of the original ACL intact. The graft is pulled into the joint through the tibial tunnel until the bone block stops at the femoral tunnel entrance. The bone block is then pushed through the medial portal into the femoral tunnel (press-fit fixation). The tibial fixation is performed with an interference screw and optionally with an extracortical button.

RESULTS

Prior studies with 2 years follow-up have shown that the clinical outcomes in primary and revision ACL reconstruction were not significantly different between the use of QT grafts with femoral press-fit fixation and the use of hamstring grafts with femoral suspension fixation.

DISCUSSION/CONCLUSION: Quadriceps tendon bone autograft and femoral press-fit fixation provides an excellent alternative as a graft choice in ACL reconstruction.The author(s) attests that consent has been obtained from any patient(s) appearing in this publication. If the individual may be identifiable, the author(s) has included a statement of release or other written form of approval from the patient(s) with this submission for publication.

摘要

背景

最近,作为初次前交叉韧带(ACL)重建的一种自体移植物替代选择,股四头肌腱(QT)受到的关注有所增加。

适应症

骨骼成熟患者的前交叉韧带重建(再断裂高风险患者及合并内侧不稳定的患者)。

技术描述

在髌骨上极做一个4厘米的皮肤切口来获取QT移植物。使用双刃刀和摆动锯从髌骨获取带有骨块的QT移植物(移植物为65毫米×10毫米,骨块为15毫米)。然后进行关节镜检查,评估ACL撕裂情况并治疗其他关节内损伤。ACL重建始于清理股骨附着点以暴露标志点。在膝关节屈曲超过110°时,通过内侧入路进行股骨隧道钻孔。通过前内侧入路引入一种特殊的入路瞄准装置,并在股骨前内侧附着区域放置导丝。使用尺寸逐渐增大的各种钻头和扩张器逐步对该导丝进行扩孔。最终直径应比移植物骨块的直径小0.5毫米,以实现压配固定。然后,使用胫骨钻孔导向器钻出胫骨隧道,保留原ACL的胫骨残端完整。将移植物通过胫骨隧道拉入关节,直到骨块停在股骨隧道入口处。然后将骨块通过内侧入路推入股骨隧道(压配固定)。胫骨固定使用挤压螺钉,也可选择使用皮质外纽扣。

结果

先前随访2年的研究表明,在初次和翻修ACL重建中,使用股骨压配固定的QT移植物与使用股骨悬吊固定的腘绳肌移植物的临床结果无显著差异。

讨论/结论:股四头肌腱骨自体移植物和股骨压配固定作为ACL重建中的移植物选择提供了一种极佳的替代方案。作者证明已获得本出版物中出现的任何患者的同意。如果个体可被识别,作者已随本投稿附上患者的豁免声明或其他书面批准形式以供发表。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/ff43/11923767/cb92e719b038/10.1177_26350254221122506-img1.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验