Barnes Ryan H, Swinehart S Dane, Rauck Ryan C, Cvetanovich Gregory L
Sports Medicine Institute, Department of Orthopaedic Surgery, The Ohio State University, Columbus, Ohio, USA.
Video J Sports Med. 2023 Mar 16;3(2):26350254231155931. doi: 10.1177/26350254231155931. eCollection 2023 Mar-Apr.
Shoulder instability is a common complaint, with treatment depending on the severity of the bony defect. Advancements in arthroscopic techniques have allowed for a less invasive surgery with decreased postoperative pain, improved graft placement, and better visualization.
Large bony defects of the glenoid require bone block augmentation to reduce recurrent instability. In this presentation, arthroscopically assisted anterior bone block was performed with a distal tibial allograft to address recurrent anterior shoulder instability with a large glenoid defect.
The patient is placed in a lateral decubitus position. Standard arthroscopic portals are made. The bone block is fashioned from a distal tibial allograft. Using a guide, drill holes are placed in the bone block. The guide is inserted from the posterior portal and placed parallel to the joint surface. Using drill sleeves, superior and inferior screw holes are drilled and a metal cannula is left in place to allow for shuttling of suture. Two anchors are placed on the glenoid to allow for capsule labral junction to be brought up to the graft once the graft is in place. The bone block is delivered through a dilated anterior portal and reduced. The sutures are tensioned. A button is placed on each set of looped sutures, a Nice knot is placed into each, and a tensioning device is tensioned. Once compression is achieved, knots are tied to perform final fixation over the buttons. A suture passing device is used to grab inferior capsule and labrum to the priorly placed anchor on the inferior glenoid and tied.
Arthroscopically assisted anterior bone block for shoulder instability has been demonstrated to have similar clinical and radiographic outcomes when compared with open treatment. However, arthroscopically assisted Latarjet has been shown to have decreased soft tissue disruption and possible improvements in graft placement.
DISCUSSION/CONCLUSION: Arthroscopically assisted anterior bone block is a technically demanding surgery but has been shown to have similar outcomes when compared with open treatment. In this video, we demonstrate an arthroscopically assisted anterior bone block for recurrent anterior shoulder instability.
The author(s) attests that consent has been obtained from any patient(s) appearing in this publication. If the individual may be identifiable, the author(s) has included a statement of release or other written form of approval from the patient(s) with this submission for publication.
肩关节不稳是常见症状,治疗方法取决于骨缺损的严重程度。关节镜技术的进步使得手术侵入性降低,术后疼痛减轻,移植物放置更精准,视野更清晰。
肩胛盂的大骨缺损需要骨块增强术以减少复发性不稳。在本病例中,采用关节镜辅助下取自胫骨远端的异体骨块进行手术,以解决伴有肩胛盂大缺损的复发性肩关节前向不稳。
患者取侧卧位。建立标准的关节镜入路。骨块取自胫骨远端异体骨。使用导向器在骨块上钻孔。导向器从后入路插入并与关节面平行放置。使用钻套钻上下螺钉孔,并留置金属套管以便缝线穿梭。在肩胛盂上放置两个锚钉,以便在移植物就位后将关节囊盂唇交界处向上提拉至移植物处。骨块通过扩大的前入路送入并复位。收紧缝线。在每组环形缝线上放置纽扣,各打一个尼斯结,并用张力装置进行张力调节。一旦达到压缩效果,打结以在纽扣上方进行最终固定。使用缝线穿过装置将下关节囊和盂唇拉至先前放置在下肩胛盂的锚钉处并打结。
与开放手术相比,关节镜辅助下肩关节前向骨块手术已被证明具有相似的临床和影像学结果。然而,关节镜辅助下的Latarjet手术已显示软组织损伤减少,移植物放置可能有所改善。
讨论/结论:关节镜辅助下肩关节前向骨块手术是一项技术要求较高的手术,但与开放手术相比已显示出相似的结果。在本视频中,我们展示了用于复发性肩关节前向不稳的关节镜辅助下肩关节前向骨块手术。
作者证明已获得本出版物中出现的任何患者的同意。如果个体可识别,作者已随本投稿附上患者的豁免声明或其他书面批准形式以供发表。