Suppr超能文献

基于无电荷锁定策略的摩擦纳米发电机高效界面电能提取

Efficient Interfacial Electrical Energy Extraction of a Triboelectric Nanogenerator by the Charge Lock-Free Strategy.

作者信息

Yi Hongyu, Fu Shaoke, Li Gui, Wang Jian, Li Kaixian, Xu Shuyan, Wu Huiyuan, Kang Yi, Xi Yi, Hu Chenguo

机构信息

School of Physics, Chongqing Key Laboratory of Interface Physics in Energy Conversion, Chongqing University, Chongqing, 400044, P. R. China.

School of Physics and Astronomy, China West Normal University, Sichuan, 637001, P. R. China.

出版信息

Adv Mater. 2025 Jul;37(29):e2503598. doi: 10.1002/adma.202503598. Epub 2025 May 12.

Abstract

Sliding-mode triboelectric nanogenerators (TENGs) generate electricity by utilizing dynamic friction on the surface of dielectric materials, demonstrating notable potential for low-frequency mechanical energy harvesting. However, conventional device structures are limited by interface charge locking and low inherent capacitance, which results in a relatively low power density. Herein, the charge-locking mechanism is explored, and propose an innovative strategy for the dynamic interface shift between two materials with different polarities. When the interfaces overlap in the same materials, the locked interface charges are fully released. Based on this concept, a charge lock-free TENG (LF-TENG) is constructed. The output energy of the LF-TENG is 4.44 times that of the traditional sliding TENG. The rotating LF-TENG achieves an output charge and a current of 5 µC, 100 µA at 60 rpm, and an average power density of 9 W m Hz at 70 MΩ. Furthermore, the equivalent circuit model is analyzed and it is found that the capacitance change of the LF-TENG is twice that of traditional devices, which is the main factor for the increase in the output power. This study provides valuable insights into efficient electrical energy extraction from sliding frictional interfaces and paves the way for the development of low-frequency mechanical energy-collection technologies.

摘要

滑动摩擦电纳米发电机(TENGs)通过利用介电材料表面的动态摩擦来发电,在低频机械能收集方面显示出显著潜力。然而,传统的器件结构受到界面电荷锁定和固有电容低的限制,这导致功率密度相对较低。在此,对电荷锁定机制进行了探索,并提出了一种创新策略,用于两种不同极性材料之间的动态界面移动。当界面在相同材料中重叠时,锁定的界面电荷会完全释放。基于这一概念,构建了一种无电荷锁定的TENG(LF-TENG)。LF-TENG的输出能量是传统滑动TENG的4.44倍。旋转的LF-TENG在60转/分钟时实现了5 μC的输出电荷和100 μA的电流,在70 MΩ时的平均功率密度为9 W m Hz。此外,对等效电路模型进行了分析,发现LF-TENG的电容变化是传统器件的两倍,这是输出功率增加的主要因素。这项研究为从滑动摩擦界面高效提取电能提供了有价值的见解,并为低频机械能收集技术的发展铺平了道路。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验