Kora Aruna Jyothi, Madhavi K, Meeravali N N
National Centre for Compositional Characterisation of Materials (NCCCM) Bhabha Atomic Research Centre (BARC) Hyderabad Telangana India.
Homi Bhabha National Institute (HBNI) Mumbai Maharashtra India.
Anal Sci Adv. 2025 May 14;6(1):e70022. doi: 10.1002/ansa.70022. eCollection 2025 Jun.
A facile, selective and sensitive method was devised for the Fe quantification in low volume samples, such as bovine serum based on suspended droplet microextraction (SDME). Various process parameters such as concentrations of acid (1.5% hydrochloric acid), complexing agent (0.7% ammonium thiocyanate), quaternary ammonium salt (0.2% Aliquat 336) and extracting solvent (500 µL octanol) were optimised. Ammonium thiocyanate forms water soluble, red coloured, anionic ferric thiocyanate complex [Fe(SCN)] with Fe ions released from the iron-protein complex under an acidic medium. Negatively charged [Fe(SCN)] complex forms hydrophobic ion associate Fe(SCN) -Aliquat 336 with hydrophilic NH head groups of Aliquat 336 and drives out the formed micelle from aqueous solution along with the iron complex. After stirring, ion associate bonded micelles are separated into a hanging micro droplet of octanol. Red coloured ferric thiocyanate complex in a suspended droplet is solubilised in methanol and Fe concentration in serum samples is obtained by recording the spectrophotometric absorbance at 505 nm. The recoveries ranged from 96.2%-98.8% with relative standard deviation (RSD) (%) values from 1.4% to 5.0% at 100-400 ng/mL confirming interference free quantification at optimised conditions. The developed method was linear over the range of 20-1000 ng/mL of Fe with a limit of detection of 2.4 ng/mL for the serum matrix. The developed method is applied to various bovine serum samples and Fe concentration values ranged from 62.7 to 1582.5 ng/mL. The obtained values were in accordance with the results obtained from the electrothermal atomic absorption spectrometry at 99% confidence level using -test indicating the accuracy of the developed method. The proposed procedure offers various advantages such as enhanced sensitivity of the spectrophotometer towards iron determination, low-cost complexing agent, low sample volume, metal and biological interference free, simplicity and selectivity. Thus, the developed method can be an alternative to the routine spectrophotometric analysis of low volume samples such as serum and other biological fluids.
基于悬滴微萃取(SDME),设计了一种简便、选择性好且灵敏的方法用于测定微量样品(如牛血清)中的铁含量。对各种工艺参数进行了优化,如酸(1.5%盐酸)、络合剂(0.7%硫氰酸铵)、季铵盐(0.2%Aliquat 336)和萃取溶剂(500 μL辛醇)的浓度。在酸性介质中,硫氰酸铵与从铁 - 蛋白质复合物中释放出的铁离子形成水溶性的红色阴离子硫氰酸铁络合物[Fe(SCN)]。带负电荷的[Fe(SCN)]络合物与Aliquat 336的亲水性NH头基形成疏水性离子缔合物Fe(SCN)-Aliquat 336,并将形成的胶束与铁络合物一起从水溶液中驱出。搅拌后,离子缔合键合的胶束被分离到辛醇的悬垂微滴中。将悬滴中红色的硫氰酸铁络合物溶解在甲醇中,通过记录505 nm处的分光光度吸光度来获得血清样品中的铁浓度。在100 - 400 ng/mL时,回收率在96.2% - 98.8%之间,相对标准偏差(RSD)(%)值在1.4%至5.0%之间,证实了在优化条件下无干扰定量。所开发的方法在20 - 1000 ng/mL的铁浓度范围内呈线性,血清基质的检测限为2.4 ng/mL。所开发的方法应用于各种牛血清样品,铁浓度值在62.7至1582.5 ng/mL之间。在99%置信水平下,使用t检验获得的值与电热原子吸收光谱法得到的结果一致,表明所开发方法的准确性。所提出的方法具有多种优点,如分光光度计对铁测定的灵敏度提高、络合剂成本低、样品体积小、无金属和生物干扰、操作简单且具有选择性。因此,所开发的方法可以替代血清和其他生物流体等微量样品的常规分光光度分析。