Suppr超能文献

距跟联合的三维映射:对外科手术入路和切除的辅助

3D Mapping of Talocalcaneal Coalitions: An Aid to Surgical Approach and Excision.

作者信息

Chaclas Nathan, Hall Carter E, Horn Bernard D, Davidson Richard S

机构信息

Children's Hospital of Philadelphia, Division of Orthopaedics, Philadelphia, PA, USA.

出版信息

J Pediatr Soc North Am. 2025 Mar 7;11:100166. doi: 10.1016/j.jposna.2025.100166. eCollection 2025 May.

Abstract

BACKGROUND

The traditional approach to talocalcaneal tarsal coalition (TCC) excision is medial through the deltoid ligament. Unfortunately, there are few anatomic markers to guide the surgeon. Preoperative planning includes radiographs and advanced imaging; these currently provide little help guiding the excision. Our method of mapping the coalition on advanced imaging accurately defines where to make osteotomies in the operating room.

METHODS

A retrospective review was conducted of TCC patients with preoperative computed tomography (CT) at a single institution from 2010 to 2022. Three independent raters reported sagittal TCC length relative to the talus. Raters further quantified TCC coronal depth and height across distal, middle, and proximal thirds of the TCC relative to the sustentaculum talus. This guidance directs two osteotomy cuts through the coalition directly into the normal lateral subtalar joint for complete and accurate excision of the coalition. CT measurement inter-rater reliability was determined using intra-class correlation.

RESULTS

Twenty-seven patients (16 male), average age 13.9 ± 2.4, met study criteria. TCCs were located on the right lower extremity in 10/27 cases. Sixteen/twenty-seven coalitions were horizontal, 10/27 was down sloping, and 1/27 was upsloping relative to the joint line. Substantial agreement was achieved between three raters (mean average measures intraclass correlation 0.781). The mean coalition length in the sagittal plane was 21.2 ± 6.0 mm, covering 49.6 ± 23.2% of the talar length.

CONCLUSION

This study describes a 3D preoperative mapping technique with high reproducibility among the present raters to resect the TCC with direct vision of the normal subtalar joints. Alternative approaches, such as obtaining CT imaging intraoperatively, expose the patient to increased radiation and anesthesia, incurring higher financial and time costs. We report a concise, readily applicable, and systematic method to map TCCs on preoperative CT and provide direct vision of the normal subtalar (talar and calcaneal) joints, as well as close to normal subtalar motion.

KEY CONCEPTS

(1)To date, very little in the way of intraoperative planning for TCCs has been proposed in the literature, even though advanced imaging has been widely used preoperatively.(2)Our method of mapping coalitions on preoperative CT may assist with intraoperative resection. Additionally, this method demonstrates the three-dimensional variety that can be expected in surgical excision of these coalitions.(3)Neither the medial to lateral depth nor the distance proximal from the sustentaculum talus was uniform as the coalitions were thickest centrally and tapered both proximally and distally.

LEVEL OF EVIDENCE

IV.

摘要

背景

距下关节跗骨联合(TCC)传统的切除方法是通过三角韧带从内侧入路。遗憾的是,几乎没有解剖标志可用于指导外科医生。术前规划包括X线片和高级影像学检查;目前这些检查在指导切除方面帮助不大。我们在高级影像学上标记联合部位的方法能够准确界定在手术室中进行截骨的位置。

方法

对2010年至2022年在单一机构接受术前计算机断层扫描(CT)的TCC患者进行回顾性研究。三名独立评估者报告TCC相对于距骨的矢状长度。评估者还进一步量化了TCC相对于距骨支撑突在TCC远端、中部和近端三分之一处的冠状深度和高度。该指导可引导两条截骨线直接穿过联合部位进入正常的外侧距下关节,以完整、准确地切除联合部位。使用组内相关系数确定CT测量的评估者间可靠性。

结果

27例患者(16例男性)符合研究标准,平均年龄13.9±2.4岁。27例中有10例TCC位于右下肢。27例联合部位中,16例呈水平状,10例向下倾斜,1例向上倾斜。三名评估者之间达成了高度一致(组内相关系数均值为0.781)。矢状面联合部位的平均长度为21.2±6.0mm,占距骨长度的49.6±23.2%。

结论

本研究描述了一种术前三维标记技术,在当前评估者之间具有高重复性,可在直视正常距下关节的情况下切除TCC。其他方法,如术中获取CT影像,会使患者接受更多辐射和麻醉,产生更高的经济和时间成本。我们报告了一种简洁、易于应用且系统的方法,可在术前CT上标记TCC,并提供正常距下(距骨和跟骨)关节的直视图像以及接近正常的距下关节活动。

关键概念

(1)尽管术前已广泛使用高级影像学检查,但迄今为止,文献中很少提出TCC的术中规划方法。(2)我们在术前CT上标记联合部位的方法可能有助于术中切除。此外,该方法展示了这些联合部位手术切除中可能出现的三维多样性。(3)联合部位从中部向近端和远端逐渐变细,因此无论是从内侧到外侧的深度,还是距距骨支撑突近端的距离都不一致。

证据级别

IV级

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验