de Souza Victor M, Zuliani Carolina C, da Cunha Jéssica B, Carron Juliana, Lima Carmen S P, Coimbra Ibsen B, Rosa Paulo T V, Moraes Ângela M
School of Chemical Engineering, University of Campinas - UNICAMP, 13083-852 Campinas, São Paulo, Brazil.
School of Medical Sciences, University of Campinas - UNICAMP, 13083-887 Campinas, São Paulo, Brazil.
ACS Biomater Sci Eng. 2025 Jun 19. doi: 10.1021/acsbiomaterials.4c02155.
Scaffolds for tissue engineering can be obtained from synthetic or natural materials, with decellularized tissues being particularly attractive. Among these, porcine auricular cartilage is of special interest because of its availability, similarity to the human extracellular matrix (ECM), and cost-effectiveness. Decellularization of animal tissues yields extracellular matrices (ECM) rich in collagen, elastin, and glycosaminoglycans (GAGs), which are essential for providing mechanical support and creating a favorable environment for cell adhesion and tissue development. Traditional decellularization methods that rely on surfactants, such as sodium dodecyl sulfate (SDS), can have drawbacks, including protein denaturation, cytotoxic effects, the need for extensive washing, and the production of hazardous effluents. Alternative approaches involving the use of supercritical CO (scCO) combined with cosolvents and preceded by specific tissue pretreatments have the potential to minimize ECM degradation, reduce effluent production, and allow for the recycling of CO, thus lowering the overall carbon footprint. In this study, the decellularization of porcine auricular cartilage was investigated using osmotic shock and freeze-thaw pretreatments, followed by exposure to scCO combined with either butanol or ethanol. For comparison, traditional SDS decellularization was also performed. The decellularized tissues were assessed based on ECM structure, cell removal efficiency, and mechanical properties through histological analysis, DNA quantification, and mechanical compression testing. The results showed that none of the treatments fully decellularized the cartilage, likely due to the tissue's high GAG content. However, the combination of freeze-thaw cycles followed by scCO treatment with butanol yielded the most favorable results, preserving the mechanical properties of the cartilage while minimizing ECM degradation.
组织工程支架可以由合成材料或天然材料制成,其中脱细胞组织特别具有吸引力。其中,猪耳软骨因其可得性、与人细胞外基质(ECM)的相似性以及成本效益而备受关注。动物组织的脱细胞处理可产生富含胶原蛋白、弹性蛋白和糖胺聚糖(GAGs)的细胞外基质(ECM),这些对于提供机械支持以及为细胞黏附和组织发育创造有利环境至关重要。依赖表面活性剂(如十二烷基硫酸钠(SDS))的传统脱细胞方法可能存在缺点,包括蛋白质变性、细胞毒性作用、需要大量洗涤以及产生有害废水。涉及使用超临界CO(scCO)并结合助溶剂且在特定组织预处理之后的替代方法有可能将ECM降解降至最低、减少废水产生并实现CO的循环利用,从而降低总体碳足迹。在本研究中,使用渗透休克和冻融预处理对猪耳软骨进行脱细胞处理,随后将其暴露于与丁醇或乙醇结合的scCO中。为作比较,还进行了传统的SDS脱细胞处理。通过组织学分析、DNA定量和机械压缩测试,基于ECM结构、细胞去除效率和机械性能对脱细胞组织进行评估。结果表明,由于软骨中GAG含量高,没有一种处理方法能使软骨完全脱细胞。然而,冻融循环后用丁醇进行scCO处理的组合产生了最有利的结果,在使ECM降解最小化的同时保留了软骨的机械性能。