Achieving High Strength in Mg-0.7Sm-0.3Zr Alloy via Room-Temperature Rotary Swaging: Radial Gradient Microstructure and Grain Refinement Mechanisms.

Room-temperature rotary swaging was conducted on microalloyed high-ductility Mg-0.7Sm-0.3Zr alloy rods to investigate microstructural and mechanical variations across different swaging passes and radial positions. The results indicate that following room-temperature rotary swaging, the alloy rods exhibit a large number of tensile twins and low-angle grain boundaries, leading to significant grain refinement. After two swaging passes, the microstructure exhibits a pronounced radial gradient, characterized by progressively finer grain sizes from the core to the edge regions, with a hardness difference of 3.8 HV between the edge and the core. After five swaging passes, the grain size was refined from an initial 4.37 μm to 2.02 μm. The yield strength and ultimate tensile strength of the alloy increased from 157 MPa and 210 MPa in the extruded state to 292 MPa and 302 MPa, respectively. This observed strengthening is primarily attributed to grain refinement, dislocation hardening, and texture strengthening, with grain refinement playing the dominant role. The grain refinement process during rotary swaging can be divided into two stages: in the initial stage, coarse grains are subdivided by tensile twinning; in the later stage, high-stress-induced grain boundary bulging leads to new dynamic recrystallization, further refining the microstructure.