Suppr超能文献

使用锯或压电器械制备游离腓骨瓣的3D打印切割导板不同槽口属性准确性的比较:一项体外研究

Comparison of the accuracy of different slot properties of 3D-printed cutting guides for raising free fibular flaps using saw or piezoelectric instruments: an in vitro study.

作者信息

Lohn Britta Maria, Raith Stefan, Ooms Mark, Winnand Philipp, Hölzle Frank, Modabber Ali

机构信息

Department of Oral and Maxillofacial Surgery, University Hospital RWTH Aachen, Pauwelsstraße 30, 52074, Aachen, Germany.

出版信息

Int J Comput Assist Radiol Surg. 2025 Jul 12. doi: 10.1007/s11548-025-03474-2.

Abstract

PURPOSE

The free fibular flap (FFF) is a standard procedure for the oral rehabilitation of segmental bone defects in the mandible caused by diseases such as malignant processes, osteonecrosis, or trauma. Digital guides and computer-assisted surgery (CAS) can improve precision and reduce the time and cost of surgery. This study evaluates how different designs of slot cutting guides, guiding heights, and cutting instruments affect surgical accuracy during mandibular reconstruction.

METHODS

Ninety model operations in a three-part fibular transplant for mandibular reconstruction were conducted according to digital planning with three guide designs (standard, flange, and anatomical slots), three guide heights (1 mm, 2 mm, 3 mm), and two osteotomy instruments (piezoelectric instrument and saw). The cut segments were digitized using computed tomography and digitally evaluated to assess surgical accuracy.

RESULTS

For vestibular and lingual segment length, the anatomical slot and the flange appear to be the most accurate, with the flange slightly under-contoured vestibularly and the standard slot over-contoured lingually and vestibularly (p < 0.001). There were only minor differences between the use of saw and piezoelectric instrument for lingual (p = 0.005) and vestibular (p < 0.001) length and proximal angle (p = 0.014). The U-distance after global reconstruction for flanges resulted in a median deviation of 0.0468 mm (IQR 8.15), but was not significant (p = 0.067).

CONCLUSION

Anatomical slots and flanges are recommended for osteotomy, with guiding effects relying on both haptic and visual control. Unilateral guided flanges also work accurately at high guidance heights. The results of piezoelectric instrument (PI) and saw showed comparable results in the assessment of individual segments and U-reconstruction in this in vitro study without soft tissue, so that the final decision is left to the expertise of the surgeons.

摘要

目的

游离腓骨瓣(FFF)是用于下颌骨节段性骨缺损口腔修复的标准手术方法,这些缺损由恶性病变、骨坏死或创伤等疾病引起。数字导板和计算机辅助手术(CAS)可提高手术精度,减少手术时间和成本。本研究评估不同设计的开槽导板、导板高度和切割器械在下颌骨重建手术中对手术准确性的影响。

方法

根据数字规划,采用三种导板设计(标准型、带翼型和解剖型开槽)、三种导板高度(1毫米、2毫米、3毫米)和两种截骨器械(压电器械和锯),对90例用于下颌骨重建的三段式腓骨移植模型手术进行操作。使用计算机断层扫描对切割段进行数字化处理,并进行数字评估以评估手术准确性。

结果

对于前庭和舌侧段长度,解剖型开槽和带翼型似乎最为准确,带翼型在前庭侧轮廓略不足,标准型开槽在舌侧和前庭侧轮廓过度(p<0.001)。在舌侧(p = 0.005)、前庭侧(p<0.001)长度和近端角度(p = 0.014)方面,使用锯和压电器械之间仅有微小差异。带翼型在整体重建后的U距离中位数偏差为0.0468毫米(四分位间距8.15),但差异不显著(p = 0.067)。

结论

建议使用解剖型开槽和带翼型进行截骨,其导向效果依赖触觉和视觉控制。单侧带翼导板在高导板高度时也能准确工作。在这项无软组织的体外研究中,压电器械(PI)和锯在单个节段评估和U形重建方面结果相当,因此最终决策取决于外科医生的专业知识。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验