Suppr超能文献

去芽后的伤口特征:第二部分——比较烧灼法和苛性糊剂法。

Wound characteristics after disbudding: Part II-Comparing cautery and caustic paste methods.

作者信息

Drwencke Alycia M, Adcock Sarah J J, Tucker Cassandra B

机构信息

Center for Animal Welfare, Department of Animal Science, University of California, Davis, Davis, CA 95616; Animal Behavior Graduate Group, University of California, Davis, Davis, CA 95616.

Department of Animal and Dairy Sciences, University of Wisconsin-Madison, Madison, WI 53706.

出版信息

J Dairy Sci. 2025 Oct;108(10):11478-11492. doi: 10.3168/jds.2025-26687. Epub 2025 Aug 6.

Abstract

Disbudding is a common painful procedure. Farms vary in method (e.g., cautery or paste), whether the horn bud hair is shaved, or in the quantity of paste applied, for example. However, little research compares the long-term effects among these methods. Our objective was to describe wound healing, sensitivity, and horn regrowth following cautery and 2 methods of caustic paste disbudding. Female Holstein calves were assigned to 1 of 4 treatments (n = 25/treatment): non-disbudded sham (Control), 12.7-mm hot iron leaving the bud in (Hot Iron), 0.2 mL of paste on shaved horn buds (0.2 Shaved), or 0.3 mL of paste on unshaved horn buds (0.3 Unshaved). Before disbudding, at 3 d of age, calves received a local block and systemic pain relief. Wounds were scored 1 to 2×/wk until they were fully healed and only a thin scar line remained. Nine tissue types were scored, including epithelium, when the wounds were covered in a new layer of skin. Wound depth, diameter, and mechanical nociceptive threshold (MNT) measures to evaluate sensitivity were collected 4, 14, 28, and 42 d after disbudding. Compared with Controls, all disbudded calves exhibited lower MNT values in the first 42 d, whereas sensitivity was similar among disbudding treatments. Wound diameter was similar 4 d after disbudding. In the following weeks, wounds from Hot Iron contracted, whereas those from paste first increased in size. Wound depth in the weeks after disbudding was smaller for Hot Iron than caustic paste. Paste wounds took 16 wk to re-epithelialize and 17 to 18 wk to heal, and this was at least twice as long as cautery disbudding, where these stages were reached after 7 and 10 wk, respectively, on average. Horn regrowth was present in 4% of buds from both Hot Iron and 0.3 Unshaved, and 8% from 0.2 Shaved. Applying 0.2 Shaved or 0.3 Unshaved treatments created similar wound size, sensitivity, healing, and regrowth, confirming the likeness of these ways of chemically destroying horn growing tissue. Taken together, all wounds were more sensitive than un-damaged tissue for at least 42 d, and paste wounds were deeper and increased in size, whereas Hot-Iron wounds contracted. Paste wounds also took at least twice as long to re-epithelize and fully heal compared with those from cautery disbudding. These results highlight the importance of understanding methodological differences associated with routine management procedures and, when viewed in combination with other available information, suggest cautery disbudding is better for calf welfare than caustic paste.

摘要

去角术是一种常见的痛苦手术。不同农场的方法存在差异(例如,烧灼法或涂抹糊剂法),比如是否剃除角芽毛发,或者涂抹糊剂的量等。然而,很少有研究比较这些方法的长期效果。我们的目的是描述烧灼法以及两种苛性糊剂去角术方法后的伤口愈合情况、敏感性和角的再生情况。将雌性荷斯坦犊牛分配到4种处理中的1种(每组n = 25):未去角的假手术组(对照组)、保留角芽的12.7毫米热烙铁烧灼组(热烙铁组)、在剃除角芽上涂抹0.2毫升糊剂组(0.2剃除组),或在未剃除角芽上涂抹0.3毫升糊剂组(0.3未剃除组)。在去角术前,即犊牛3日龄时,给予局部阻滞和全身止痛处理。每周对伤口进行1至2次评分,直到伤口完全愈合,仅留下一条细疤痕线。当伤口被新的一层皮肤覆盖时,对包括上皮组织在内的9种组织类型进行评分。在去角术后4、14、28和42天收集伤口深度、直径以及用于评估敏感性的机械伤害性感受阈值(MNT)测量值。与对照组相比,所有去角的犊牛在最初42天内MNT值均较低,而去角处理组之间的敏感性相似。去角术后4天伤口直径相似。在接下来的几周里,热烙铁处理的伤口收缩,而糊剂处理的伤口首先增大。去角术后几周,热烙铁处理的伤口深度比苛性糊剂处理的小。糊剂处理的伤口需要16周重新上皮化,17至18周愈合,这至少是烧灼去角术所需时间的两倍,烧灼去角术平均分别在7周和10周达到这些阶段。热烙铁组和0.3未剃除组的角芽中有4%出现角再生,0.2剃除组中有8%出现角再生。应用0.2剃除组或0.3未剃除组处理产生的伤口大小、敏感性、愈合和再生情况相似,证实了这两种化学破坏角生长组织方法的相似性。总体而言,所有伤口在至少42天内比未受损组织更敏感,糊剂处理的伤口更深且尺寸增大,而热烙铁处理的伤口收缩。与烧灼去角术的伤口相比,糊剂处理的伤口重新上皮化和完全愈合所需时间也至少长两倍。这些结果凸显了理解与常规管理程序相关的方法差异的重要性,并且结合其他可用信息来看,表明烧灼去角术对犊牛福利而言优于苛性糊剂法。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验