Suppr超能文献

手部手术中镍钛诺加压吻合钉固定失败:两例报告

Nitinol Compression Staple Fixation Failure in Hand Surgery: A Report of Two Cases.

作者信息

Ishibashi Shigeki, Umamoto Toko, Kanasaki Maya, Tsukuura Reiko, Yamamoto Takumi

机构信息

Plastic and Reconstructive Surgery, National Center for Global Health and Medicine, Tokyo, JPN.

Orthopaedic Surgery, Graduate School of Biomedical and Health Sciences, Hiroshima University, Hirohsima, JPN.

出版信息

Cureus. 2025 Jul 10;17(7):e87652. doi: 10.7759/cureus.87652. eCollection 2025 Jul.

Abstract

Nitinol compression staples are increasingly used in hand surgery due to their shape memory effect and simplified surgical technique. While they have demonstrated favorable outcomes, reports on complications and failure mechanisms remain limited. We report two cases of fixation failure: one in a vascularized proximal interphalangeal joint transfer and another in thumb carpometacarpal joint arthrodesis. Both cases required revision surgery with plate fixation. These cases suggest that failure resulted from asymmetrical force distribution. This was caused by one staple leg achieving only monocortical purchase while the other was bicortical, combined with a short working length. These cases highlight the critical importance of preoperative planning and precise staple placement, particularly when bone dimensions are unequal or the working length is limited.

摘要

镍钛诺加压吻合钉因其形状记忆效应和简化的手术技术,在手部外科手术中的应用日益广泛。虽然已证明其效果良好,但关于并发症和失败机制的报道仍然有限。我们报告两例固定失败的病例:一例为带血管蒂的近节指间关节转移术,另一例为拇指腕掌关节融合术。两例均需采用钢板固定进行翻修手术。这些病例表明,失败是由力分布不对称所致。这是由于一个吻合钉腿仅实现了单皮质固定,而另一个为双皮质固定,同时工作长度较短。这些病例凸显了术前规划和精确放置吻合钉的至关重要性,尤其是在骨尺寸不等或工作长度有限的情况下。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/8425/12335001/86a8c49cd003/cureus-0017-00000087652-i01.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验