Suppr超能文献

改良脊髓扩散张量成像的重测信度和不同扫描仪间的可重复性

Test-Retest Reliability and Inter-Scanner Reproducibility of Improved Spinal Diffusion Tensor Imaging.

作者信息

Ruff Christer, König Stephan, Rattay Tim W, Gohla Georg, Ernemann Ulrike, Bender Benjamin, Klose Uwe, Lindig Tobias

机构信息

Department of Diagnostic and Interventional Neuroradiology, Eberhard Karls-University Tuebingen, 72076 Tuebingen, Germany.

Center for Neurology, University Hospital Kiel, Arnold-Heller-Str 3, 24105 Kiel, Germany.

出版信息

Diagnostics (Basel). 2025 Aug 16;15(16):2057. doi: 10.3390/diagnostics15162057.

Abstract

: Spinal diffusion tensor imaging (sDTI) remains a challenging method for the selective evaluation of key anatomical structures, like pyramidal tracts (PTs) and dorsal columns (DCs), and for reliably quantifying diffusion metrics such as fractional anisotropy (FA), radial diffusivity (RD), mean diffusivity (MD), and axial diffusivity (AD). This prospective, single-center study aimed to assess the reproducibility, robustness, and reliability of an optimized axial sDTI protocol, specifically intended for long fiber tracts. : We developed an optimized Stejskal-Tanner sequence for high-resolution, axial sDTI of the cervical spinal cord at 3.0 T. Using advanced standardized evaluation and post-processing methods, we estimated DTI values for PTs, DCs, and AHs at the level of the second cervical vertebra. Reliability was evaluated through repeated measurements in 16 healthy volunteers and by comparing results from two 3.0 T scanners (Magnetom Skyra and Magnetom Prisma, Siemens Healthineers, Erlangen, Germany). Reproducibility was assessed using paired t-tests, intraclass correlation coefficients (ICCs), Bland-Altman analysis, and coefficients of variation (CVs). : The optimized sDTI protocol demonstrated high consistency for FA between test-retest sessions and across scanners. For the Skyra, the DC region showed the highest reliability (average ICC = 0.858) followed by the PT region (average ICC = 0.789). On the Prisma, the PT region reached an average ICC of 0.854, with the DC region at 0.758. Pooled inter-scanner data indicated good-to-excellent agreement, particularly in the PT region (average ICC = 0.860). FA CVs remained low (<10%) across all regions and scanners. RD showed good-to-excellent ICC values for PTs and DCs (average ICC for Skyra 0.642 and 0.769 and 0.926 and 0.830 for Prisma, respectively) but showed a higher CV between 14.6 and 19.4% for these two scanners. : Improved sDTI offers highly reproducible FA measurements for all metrics with scanner independence, supporting its potential as a robust tool for detecting and monitoring spinal cord pathologies.

摘要

脊髓扩散张量成像(sDTI)对于选择性评估关键解剖结构(如锥体束(PTs)和后索(DCs))以及可靠量化扩散指标(如分数各向异性(FA)、径向扩散率(RD)、平均扩散率(MD)和轴向扩散率(AD))而言,仍然是一种具有挑战性的方法。这项前瞻性单中心研究旨在评估一种专门针对长纤维束的优化轴向sDTI方案的可重复性、稳健性和可靠性。

我们开发了一种优化的Stejskal-Tanner序列,用于在3.0 T磁场下对颈髓进行高分辨率轴向sDTI检查。使用先进的标准化评估和后处理方法,我们在第二颈椎水平估计了PTs、DCs和前角(AHs)的DTI值。通过对16名健康志愿者进行重复测量,并比较两台3.0 T扫描仪(德国西门子医疗公司的Magnetom Skyra和Magnetom Prisma)的结果来评估可靠性。使用配对t检验、组内相关系数(ICC)、Bland-Altman分析和变异系数(CVs)来评估可重复性。

优化后的sDTI方案在重测期间和不同扫描仪之间的FA显示出高度一致性。对于Skyra扫描仪,DC区域显示出最高的可靠性(平均ICC = 0.858),其次是PT区域(平均ICC = 0.789)。在Prisma扫描仪上,PT区域的平均ICC达到0.854,DC区域为0.758。合并的扫描仪间数据表明一致性良好至优秀,特别是在PT区域(平均ICC = 0.860)。所有区域和扫描仪的FA CVs均保持较低水平(<10%)。RD在PTs和DCs方面显示出良好至优秀的ICC值(Skyra扫描仪的平均ICC分别为0.642和0.769,Prisma扫描仪分别为0.926和0.830),但这两台扫描仪之间的CV在14.6%至19.4%之间较高。

改进后的sDTI为所有指标提供了高度可重复的FA测量,且与扫描仪无关,支持其作为检测和监测脊髓病变的强大工具的潜力。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/0945/12385547/9e871e56f6e1/diagnostics-15-02057-g004.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验