Neef C, Meijer D K
Naunyn Schmiedebergs Arch Pharmacol. 1984 Dec;328(2):111-8. doi: 10.1007/BF00512059.
Correlations between lipophilicity or molecular weight and some pharmacokinetic parameters such as clearance (Cl), elimination rate constant (k10), volume of distribution (V), and terminal half life (lambda z) are presented for a series of structurally related quaternary ammonium cations (QACs). The structure-pharmacokinetics relations were fitted using the computer program NONLIN and were represented by linear, parabolic or S-shaped curves. The relationship between total plasma clearance or hepatic, renal and intestinal clearance and lipophilicity for the present set of data could be described most properly by the equation Y = 1/(aXb + c), where Y stands for the logarithm of the pharmacokinetic parameters and X represents the logarithm of the values of some physicochemical parameters, such as the partition coefficient (P), the (HPLC) capacity factor k' (another lipophilicity parameter) and molecular weight (MW). On the basis of this relationship, correlations of the hepatic or intestinal clearances with the lipophilicity parameters were good (r = 0.98 and r = 0.95 respectively). Curves relating values for partition coefficients and clearance via liver and intestine (expressed relative to the most simple QAC tetramethyl ammonium) showed S-shaped correlation patterns, in contrast to the renal clearance, which correlated poorly (r = 0.54) with lipophilicity. The extent of biliary output of the organic cations shows a threshold phenomenon, sharply increasing at log P greater than 1.5 to a maximum at P greater than 2.5. This pattern was less pronounced in the case of intestinal elimination and absent in the case of renal clearance. The apparent maximum in the hepatic and intestinal clearance for the most lipophilic organic cations is probably due to limitation by organ blood-flow and/or plasma protein binding.(ABSTRACT TRUNCATED AT 250 WORDS)
本文给出了一系列结构相关的季铵阳离子(QACs)的亲脂性或分子量与一些药代动力学参数之间的相关性,这些参数包括清除率(Cl)、消除速率常数(k10)、分布容积(V)和末端半衰期(lambda z)。结构-药代动力学关系通过计算机程序NONLIN进行拟合,并由线性、抛物线或S形曲线表示。对于本数据集,总血浆清除率或肝、肾和肠道清除率与亲脂性之间的关系可以用方程Y = 1/(aXb + c)最恰当地描述,其中Y代表药代动力学参数的对数,X代表一些物理化学参数值的对数,如分配系数(P)、(高效液相色谱)容量因子k'(另一个亲脂性参数)和分子量(MW)。基于这种关系,肝清除率或肠道清除率与亲脂性参数之间的相关性良好(分别为r = 0.98和r = 0.95)。与肾脏清除率相反,分配系数与肝脏和肠道清除率(相对于最简单的QAC四甲基铵表示)之间的曲线显示出S形相关模式,肾脏清除率与亲脂性的相关性较差(r = 0.54)。有机阳离子的胆汁排出程度呈现阈值现象,在log P大于1.5时急剧增加,在P大于2.5时达到最大值。这种模式在肠道消除的情况下不太明显,在肾脏清除的情况下不存在。最亲脂性有机阳离子的肝清除率和肠道清除率的明显最大值可能是由于器官血流量和/或血浆蛋白结合的限制。(摘要截短至250字)