Birk D E, Trelstad R L
J Cell Biol. 1984 Dec;99(6):2024-33. doi: 10.1083/jcb.99.6.2024.
The regulation of collagen fibril, bundle, and lamella formation by the corneal fibroblasts, as well as the organization of these elements into an orthogonal stroma, was studied by transmission electron microscopy and high voltage electron microscopy. Transmission and high voltage electron microscopy of chick embryo corneas each demonstrated a series of unique extracellular compartments. Collagen fibrillogenesis occurred within small surface recesses. These small recesses usually contained between 5 and 12 collagen fibrils with typically mature diameters and constant intrafibrillar spacing. The lateral fusion of the recesses resulted in larger recesses and consequent formation of prominent cell surface foldings. Within these surface foldings, bundles that contained 50-100 collagen fibrils were formed. The surface foldings continued to fuse and the cell surface retracted, forming large surface-associated compartments in which bundles coalesced to form lamellae. High voltage electron microscopy of 0.5 micron sections cut parallel to the corneal surface revealed that the corneal fibroblasts and their processes had two major axes at approximately right angles to one another. The surface compartments involved in the production of the corneal stroma were aligned along the fibroblast axes and the orthogonality of the cell was in register with that of the extracellular matrix. In this manner, corneal fibroblasts formed collagen fibrils, bundles, and lamellae within a controlled environment and thereby determined the architecture of the corneal stroma by the configuration of the cell and its associated compartments.
通过透射电子显微镜和高压电子显微镜研究了角膜成纤维细胞对胶原纤维、纤维束和板层形成的调节,以及这些成分如何组织成正交的基质。鸡胚角膜的透射电子显微镜和高压电子显微镜观察均显示出一系列独特的细胞外区室。胶原纤维形成发生在小的表面凹陷内。这些小凹陷通常含有5至12根胶原纤维,其直径通常成熟且纤维内间距恒定。凹陷的横向融合导致形成更大的凹陷,并随之形成明显的细胞表面褶皱。在这些表面褶皱内,形成了包含50 - 100根胶原纤维的纤维束。表面褶皱持续融合,细胞表面回缩,形成与表面相关的大的区室,其中纤维束合并形成板层。平行于角膜表面切割的0.5微米切片进行高压电子显微镜观察显示,角膜成纤维细胞及其突起有两个大致相互成直角的主轴。参与角膜基质产生的表面区室沿成纤维细胞轴排列,细胞的正交性与细胞外基质的正交性一致。通过这种方式,角膜成纤维细胞在一个可控的环境中形成胶原纤维、纤维束和板层,从而通过细胞及其相关区室的构型决定角膜基质的结构。