Eichele G, Tickle C, Alberts B M
Anal Biochem. 1984 Nov 1;142(2):542-55. doi: 10.1016/0003-2697(84)90504-9.
A method of controlled release that allows the continuous local application of retinoids (vitamin A derivatives) in living tissues has been developed. Several biocompatible 200-microns-diameter polymeric beads have been tested as possible carriers. Each type of bead was loaded by soaking in an isotopically labeled retinoid solution, washed, and then transferred into tissue culture medium for quantitative release measurements. Positively-charged ion-exchange resins of the Dowex 1 type were found to be the most suitable for the controlled release of retinoic acid, a negatively charged compound. For the controlled release of uncharged retinoids such as retinyl acetate, uncharged acrylic ester polymer beads are preferred; these beads can also be used to release the negatively charged compounds retinoic acid and prostaglandin E1. In all cases, a prolonged release is obtained that persists for more than a day. During this interval, the release is diffusion-controlled, and the total amount of compound released is directly proportional to the amount of the compound that the bead is exposed to during the initial loading step. High-performance liquid chromatography has been used to analyze the nature of the released retinoid. When the positively charged beads are loaded with all-trans-retinoic acid, there is a time-dependent decrease in the proportion of the all-trans isomer released which is due to an increased release of two cis isomers. This isomerization reaction occurs at a considerably slower rate when the uncharged beads are used as carriers. To mimic the conditions under which the local release of retinoic acid causes striking pattern duplications in developing chick wings, beads loaded with isotopically labeled retinoids were manually implanted into a slit cut into wing buds of stage-20 chick embryos. The release rate obtained was comparable to that found in vitro, and a time-dependent accumulation of the released radioactive compound was measured that was confined to the tissue near the site of implantation. All of the beads tested were readily accommodated by the tissue and could be easily removed at any time to terminate the treatment. It is believed that the controlled release of chemicals from such tiny biocompatible implants has a wide potential range of applications in biology.
一种能够在活体组织中持续局部应用类视黄醇(维生素A衍生物)的控释方法已被开发出来。几种直径为200微米的生物相容性聚合物微珠已作为可能的载体进行了测试。每种类型的微珠通过浸泡在同位素标记的类视黄醇溶液中进行加载,洗涤后,再转移到组织培养基中进行定量释放测量。发现Dowex 1型带正电荷的离子交换树脂最适合用于维甲酸(一种带负电荷的化合物)的控释。对于乙酸视黄酯等不带电荷的类视黄醇的控释,优选不带电荷的丙烯酸酯聚合物微珠;这些微珠也可用于释放带负电荷的化合物维甲酸和前列腺素E1。在所有情况下,都能实现持续一天以上的延长释放。在此期间,释放是由扩散控制的,释放的化合物总量与微珠在初始加载步骤中接触的化合物量成正比。高效液相色谱法已被用于分析释放的类视黄醇的性质。当带正电荷的微珠加载全反式维甲酸时,释放的全反式异构体比例会随时间下降,这是由于两种顺式异构体的释放增加所致。当使用不带电荷的微珠作为载体时,这种异构化反应发生的速度要慢得多。为了模拟维甲酸局部释放导致发育中的鸡翅膀出现明显图案重复的条件,将加载了同位素标记类视黄醇的微珠手动植入到第20阶段鸡胚胎翼芽上切开的缝隙中。获得的释放速率与体外实验中发现的速率相当,并且测量到释放的放射性化合物随时间的积累局限于植入部位附近的组织。所有测试的微珠都很容易被组织容纳,并且可以在任何时候轻松取出以终止治疗。人们认为,从这种微小的生物相容性植入物中进行化学物质的控释在生物学领域具有广泛的潜在应用范围。