Koski C L, Ramm L E, Hammer C H, Mayer M M, Shin M L
Proc Natl Acad Sci U S A. 1983 Jun;80(12):3816-20. doi: 10.1073/pnas.80.12.3816.
Lysis of nucleated cells by complement was studied to determine whether the lytic process by C5b-9 conforms to a one-hit mechanism as in the case of erythrocytes. Two nucleated cell lines, Molt 4 and U937, derived from human T lymphocytes and histiocytes, respectively, were employed as targets. The antibody-sensitized cells were used to develop the titration curves, measuring cell death as a function of limiting quantities of human C6 or C5,6 complex in the presence of an excess of other complement components. The cytolysis curves generated in both experiments were sigmoidal, in sharp contrast to the monotonic curves observed in lysis of erythrocytes treated similarly. The sigmoidal curves of cytolysis indicate a cooperative action of several molecules of C6 or acid-activated C5,6 complex, C(56)a. In contrast to the multi-hit characteristics of cytolysis, dose-response measurements of the release of 86Rb indicated that only one effective molecule of C6 per cell is required for assembly of a 86Rb-releasing channel. This divergence indicates that lysis requires formation of several channels or, alternatively, assembly of large channels that are formed by several molecules of C6. Because prior studies with erythrocyte ghosts have shown that only a single effective molecule of C6 is required for assembly of a transmembrane channel, regardless of size, we prefer to interpret the multi-hit characteristics of nucleated cell lysis as an indication of a multi-channel requirement, rather than channel enlargement.
研究了补体对有核细胞的溶解作用,以确定C5b - 9的溶解过程是否如红细胞那样符合单打击机制。分别来源于人T淋巴细胞和组织细胞的两种有核细胞系Molt 4和U937被用作靶细胞。用抗体致敏细胞绘制滴定曲线,在存在过量其他补体成分的情况下,将细胞死亡作为人C6或C5,6复合物限量的函数进行测量。两个实验中产生的细胞溶解曲线均为S形,这与类似处理的红细胞溶解中观察到的单调曲线形成鲜明对比。细胞溶解的S形曲线表明几个C6分子或酸活化的C5,6复合物C(56)a具有协同作用。与细胞溶解的多打击特征相反,86Rb释放的剂量反应测量表明,每个细胞组装一个86Rb释放通道仅需要一个有效的C6分子。这种差异表明细胞溶解需要形成几个通道,或者由几个C6分子形成大通道。因为先前对红细胞血影的研究表明,无论大小,组装跨膜通道仅需要一个有效的C6分子,所以我们更倾向于将有核细胞溶解的多打击特征解释为多通道需求的指示,而不是通道扩大。