Cooney W P, Lucca M J, Chao E Y, Linscheid R L
J Bone Joint Surg Am. 1981 Dec;63(9):1371-81.
To measure the motions of the trapeziometacarpal joint of the thumb quantitatively, a roentgenographic method was developed and tested using T-shaped metal markers, a special cassette-holder, and biplane roentgenograms. Two experiments were performed. In the first one, the metal markers were fixed to the trapezium and third metacarpal in ten cadaver specimens, and a fixed spatial relationship between the trapezium and the third metacarpal was identified roentgenographically. This relationship was that the reference axes of the trapezium were aligned at median angles of 48 degrees of flexion, 38 degrees of abduction, and 80 degrees of pronation with reference to the reference axes of the third metacarpal. In the second experiment, in the dominant hand of nine male and ten female subjects (average age, twenty-six years) T-shaped markers were fixed to the skin overlying the third metacarpal and the metacarpal and phalanges of the thumb. Using the same roentgenographic technique and coordinate systems employed in the first study, the average total motions of the trapeziometacarpal joint (determined as motions of the first metacarpal with reference to the third metacarpal) were 53 degrees of flexion-extension, 42 degrees of abduction-adduction, and 17 degrees of axial rotation (pronation-supination). In addition, six functional positions of the thumb were studied: rest, flexion, extension, abduction, tip pinch, and grasp. A position of adduction and flexion of the trapeziometacarpal joint was most common during thumb function, and both the trapeziometacarpal and metacarpophalangeal joints contributed to rotation of the thumb.
为了定量测量拇指腕掌关节的运动,我们开发并测试了一种X线摄影方法,该方法使用T形金属标记物、特殊的暗盒固定器和双平面X线片。进行了两项实验。在第一项实验中,将金属标记物固定在10个尸体标本的大多角骨和第三掌骨上,并通过X线摄影确定大多角骨和第三掌骨之间固定的空间关系。这种关系是,大多角骨的参考轴相对于第三掌骨的参考轴在屈曲48度、外展38度和旋前80度的中位角处对齐。在第二项实验中,在9名男性和10名女性受试者(平均年龄26岁)的优势手中,将T形标记物固定在覆盖第三掌骨以及拇指掌骨和指骨的皮肤上。使用与第一项研究相同的X线摄影技术和坐标系,拇指腕掌关节的平均总运动(确定为第一掌骨相对于第三掌骨的运动)为屈伸53度、内收外展42度和轴向旋转(旋前-旋后)17度。此外,还研究了拇指的六个功能位置:休息位、屈曲位、伸展位、外展位、指尖捏物位和抓握位。在拇指功能期间,拇指腕掌关节内收和屈曲的位置最为常见,并且拇指腕掌关节和掌指关节都参与拇指的旋转。