Effect of hydrophilic and hydrophobic microdomains on mode of interaction between block polymer and blood platelets.

ABA-type block copolymers composed of 2-hydroxyethyl methacrylate (HEMA), a hydrophilic monomer, and styrene (St), a hydrophobic monomer, were synthesized by the coupling reaction of telechelic oligomers used as prepolymers. These block copolymers may be represented as microphase-separated structures. It is therefore possible to change the balance between hydrophilicity and hydrophobicity in the level of an assembled order of macromolecules. In response to the relative composition of the copolymers, three typical morphological patterns were observed in electron microscopic photographs: dispersed domains of continuous St chains in the region of HEMA chains, alternate HEMA and St lamellae and finally, dispersed phases of continuous HEMA chains in the region of St chains. The effect of the hydrophilic and hydrophobic microdomains of the copolymers on the mode of interaction between polymers and platelets was studied by the microsphere column method. In the case of homopolymers and random copolymers, a significant degree of platelet adhesion and aggregation was observed. However, the degree of platelet adhesion and deformation was suppressed on the surfaces of the block copolymers containing 0.608 and 0.347 mole fractions of HEMA whose microdomains were hydrophilic-hydrophobic lamellae and isolated hydrophilic islands in hydrophobic areas, respectively. These results show that the microphase-separated structures were antithrombogenic and prevented platelet adhesion and deformation. On the basis of the results obtained, the interaction between platelets and polymer surfaces was described in terms of the effect of hydrophilic and hydrophobic microdomains.