Suppr超能文献

拇指腕掌关节的接触区域。

Contact areas in the thumb carpometacarpal joint.

作者信息

Ateshian G A, Ark J W, Rosenwasser M P, Pawluk R J, Soslowsky L J, Mow V C

机构信息

Department of Mechanical Engineering, Columbia University, New York, New York, USA.

出版信息

J Orthop Res. 1995 May;13(3):450-8. doi: 10.1002/jor.1100130320.

Abstract

The thumb carpometacarpal joint is a common site of osteoarthritis. It has been hypothesized that peaks of localized stress on the dorsoradial or volar-ulnar regions, or both, of the articular surfaces of the trapezium and metacarpal lead to erosion of cartilage and may be responsible for the progression of the disease. The objective of this study was to determine the contact areas in this joint under the functional position of lateral (key) pinch and in the extremes of range of motion of the joint. These contact areas were assessed relative to the observed sites of cartilage thinning. Eight hands from cadavers of women and five from cadavers of men were tested in vitro with the thumb under a 25 N load in the lateral pinch position, and under small muscle loads (0-5 N) with the thumb in flexion, extension, abduction, adduction, and neutral positions. Contact areas of articular surfaces of the thumb carpometacarpal joint were determined for these positions using a stereophotogrammetric technique. The lateral pinch position produced contact areas predominantly on the central, volar, and volar-ulnar regions of the trapezium and the metacarpal. In three specimens, contact areas were distinctly separated between the dorsoradial and volar-ulnar regions, and in one specimen, from a man, contact occurred exclusively on the dorsoradial region of the trapezium. Using stereophotogrammetry, maps of cartilage thickness also were determined for a subset of nine specimens. The volar-ulnar, ulnar, and dorsoradial regions of the trapezium were the most common sites of thin cartilage, and these may be sites of cartilage wear.(ABSTRACT TRUNCATED AT 250 WORDS)

摘要

拇指腕掌关节是骨关节炎的常见部位。据推测,大多角骨和掌骨关节面的背桡侧或掌尺侧区域,或两者的局部应力峰值会导致软骨侵蚀,并可能是疾病进展的原因。本研究的目的是确定该关节在侧捏(关键)功能位置以及关节活动范围极限时的接触面积。这些接触面积是相对于观察到的软骨变薄部位进行评估的。对8具女性尸体的手和5具男性尸体的手进行体外测试,拇指在25 N负荷下处于侧捏位置,以及在拇指处于屈曲、伸展、外展、内收和中立位置时承受小肌肉负荷(0 - 5 N)。使用立体摄影测量技术确定拇指腕掌关节在这些位置的关节面接触面积。侧捏位置产生的接触面积主要在大多角骨和掌骨的中央、掌侧和掌尺侧区域。在三个标本中,背桡侧和掌尺侧区域的接触面积明显分开,在一个男性标本中,接触仅发生在大多角骨的背桡侧区域。使用立体摄影测量法,还为九个标本的子集确定了软骨厚度图。大多角骨的掌尺侧、尺侧和背桡侧区域是软骨变薄最常见的部位,这些可能是软骨磨损的部位。(摘要截短于250字)

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验