[Preservation and sterilization of cortical bone--biomechanical studies of the rat].

The biomechanical properties of cryopreserved, autoclaved, irradiated and chemically treated cortical bone harvested from rat tibiae were evaluated in three-point bending. Biomechanical parameters (maximum bending load, deflection, failure energy and stiffness) are not altered by cryopreservation (-70 degrees C, 28 days) or irradiation with doses of 1 kGy or 5 kGy. The maximum bending load of autoclaved (134 degrees C, 3 min) or irradiated (25 kGy) cortical bone is reduced to 82% and 74% compared that of controls tested immediately after death (100% = 74.4 +/- 6.6 N). Extension of the autoclaving time from 3 to 5 min or irradiation with 50 kGy diminishes the bending load (28% after autoclaving, 48% after irradiation), deflection and failure energy. Stiffness is altered by autoclaving only. If a sterilization process is combined with deep freezing, better biomechanical values are obtained by sterilizing the bone before deep freezing than vice versa. The bending loads for autoclaving and irradiation before deep freezing are 68.8 +/- 9.4 N and 50.8 +/- 7.9 N, as against 51.7 +/- 2.7 N and 43.1 +/- 3.9 N for autoclaving and irradiation of previously cryopreserved bone. Whereas treating bone with tetrahydrofurane does not alter its biomechanical behavior, 80% ethanol leads to a reduction of structural properties.