Sparks D L, Anantharamaiah G M, Segrest J P, Phillips M C
Lipoproteins and Atherosclerosis Group, University of Ottawa Heart Institute, Ontario, Canada.
J Biol Chem. 1995 Mar 10;270(10):5151-7. doi: 10.1074/jbc.270.10.5151.
The production of cholesteryl ester (CE) by lecithin: cholesterol acyl transferase (LCAT) is elevated significantly in hyperlipidemic subjects at high risk for coronary artery disease. To elucidate the molecular events involved, the relationship between LCAT activation and apolipoprotein (apo) A-I charge and structure in high density lipoproteins (HDL) has been studied in both native HDL and homogeneous recombinant HDL (Lp2A-I) particles containing apoA-I, palmitoyloleoyl phosphatidylcholine and cholesterol. Increasing the cholesterol content of discoidal Lp2A-I from 4 to 26 molecules/particle raises the maximum rate of cholesterol esterification by LCAT (Vmax) from 3.1 to 9.2 nmol CE/h/unit of LCAT and increases the apparent Km from 0.5 to 3.5 microM cholesterol. Similarly, increasing the cholesterol content in triolein core-containing Lp2A-I (4-18 molecules/particle) and in native HDL3 (12-21 molecules/particle) also significantly increases the Vmax for LCAT (2.8-7.7 and 0.5-3.6 nmol CE/h, respectively) and raises the Km values (7.6-36.9 and 7.3-8.5 microM cholesterol, respectively). In contrast, changes in the cholesterol content of native and recombinant HDL have no significant effect on the apparent Km values when expressed in terms of the concentration of either apoA-I or palmitoyloleoyl phosphatidylcholine. This appears to indicate that interfacial cholesterol content has no effect on the binding affinity of LCAT to different LpA-I particles but directly affects catalysis by modulating the interaction of cholesterol molecules with the active site of LCAT. Increasing the cholesterol content of the different HDL particles progressively increases the particle net negative charge, and these changes in apoA-I charge are strongly correlated with both the Vmax and apparent Km values for LCAT. This suggests that the conformation and charge of apoA-I play a central role in LCAT activation and that these parameters are influenced by the amount of cholesterol in the surface of HDL particles.
在冠状动脉疾病高危的高脂血症患者中,卵磷脂胆固醇酰基转移酶(LCAT)催化生成胆固醇酯(CE)的水平显著升高。为阐明其中涉及的分子事件,我们在天然高密度脂蛋白(HDL)以及含有载脂蛋白A-I(apoA-I)、棕榈油酰油酰磷脂酰胆碱和胆固醇的均一重组HDL(Lp2A-I)颗粒中,研究了LCAT激活与HDL中载脂蛋白(apo)A-I电荷及结构之间的关系。将盘状Lp2A-I的胆固醇含量从每个颗粒4个分子增加至26个分子,可使LCAT催化胆固醇酯化的最大速率(Vmax)从3.1 nmol CE/小时/单位LCAT提高至9.2 nmol CE/小时,并使表观米氏常数(Km)从0.5 μM胆固醇增加至3.5 μM。同样,增加含三油精核心的Lp2A-I(每个颗粒4 - 18个分子)和天然HDL3(每个颗粒12 - 21个分子)中的胆固醇含量,也显著提高了LCAT的Vmax(分别为2.8 - 7.7 nmol CE/小时和0.5 - 3.6 nmol CE/小时),并提高了Km值(分别为7.6 - 36.9 μM胆固醇和7.3 - 8.5 μM胆固醇)。相比之下,以apoA-I或棕榈油酰油酰磷脂酰胆碱浓度表示时,天然和重组HDL中胆固醇含量的变化对表观Km值无显著影响。这似乎表明,界面胆固醇含量对LCAT与不同LpA-I颗粒的结合亲和力无影响,但通过调节胆固醇分子与LCAT活性位点的相互作用直接影响催化作用。增加不同HDL颗粒的胆固醇含量会逐渐增加颗粒的净负电荷,apoA-I电荷的这些变化与LCAT的Vmax和表观Km值均密切相关。这表明apoA-I的构象和电荷在LCAT激活中起核心作用,且这些参数受HDL颗粒表面胆固醇量的影响。