Three-body wear of four types of light-activated composite resin veneering materials.

The in vitro wear resistance of four types of light-activated composite resins designed for crown and bridge veneers was determined by means of a three-body wear-testing device. After repeated cycles of loading, the wear values were measured with a profilometer, and surface textures were observed through a scanning electron microscope. All of the composite resin veneering materials examined in this investigation exhibited greater wear resistance than an unfilled poly(methyl methacrylate)-based material. The worn surface of veneering materials demonstrated outlines of fillers, indicating the difference in wear resistance between the resin matrix and the filler.