Delp S L, Ringwelski D A, Carroll N C
Department of Biomedical Engineering, Northwestern University, Chicago, Illinois.
J Biomech. 1994 Oct;27(10):1201-11. doi: 10.1016/0021-9290(94)90274-7.
Decreased range of knee motion during gait is often treated by surgically releasing the rectus femoris from the patella and transferring it to one of four sites: semitendinosus, gracilis, sartorius, or the iliotibial tract. This study was conducted to determine if there are differences between these four tendon transfer sites in terms of post-surgical moment arms about the knee and hip. A graphics-based model of the lower extremity was used to simulate the origin-to-insertion path of the rectus femoris after transfer. Anatomical studies were conducted to evaluate the accuracy of the simulated tendon transfers by comparing knee flexion moment arms calculated with the computer model to moment arms measured in two anatomical specimens. The computer simulations and anatomical studies revealed substantial differences in the knee moment arms between the four sites. We found that the rectus femoris has the largest peak knee flexion moment arm (4-5 cm) after transfer to the semitendinosus. In contrast, after transfer to the iliotibial tract the rectus femoris has a slight (0-5 mm) knee extension moment arm. None of the transfers to muscle-tendon complexes on the medial side of the knee (semitendinosus, gracilis, sartorius) substantially affect the hip rotation moment arm of the rectus femoris. Transferring to the iliotibial tract increases hip internal rotation moment arm of the rectus femoris, but only when the hip is externally rotated.
半腱肌、股薄肌、缝匠肌或髂胫束。本研究旨在确定这四个肌腱转移部位在术后膝关节和髋关节力矩臂方面是否存在差异。使用基于图形的下肢模型来模拟转移后股直肌从起点到止点的路径。通过将计算机模型计算的膝关节屈曲力矩臂与在两个解剖标本中测量的力矩臂进行比较,进行解剖学研究以评估模拟肌腱转移的准确性。计算机模拟和解剖学研究揭示了这四个部位之间膝关节力矩臂存在显著差异。我们发现,股直肌转移至半腱肌后具有最大的膝关节屈曲峰值力矩臂(4 - 5厘米)。相比之下,转移至髂胫束后,股直肌具有轻微的(0 - 5毫米)膝关节伸展力矩臂。向膝关节内侧的肌腱复合体(半腱肌、股薄肌、缝匠肌)的转移均未对股直肌的髋关节旋转力矩臂产生实质性影响。转移至髂胫束会增加股直肌的髋关节内旋力矩臂,但仅在髋关节外旋时。