de Haas F, Perton F G, van Breemen J F, Dijkema J H, Beintema J J, van Bruggen E F
BIOSON Research Institute, Rijksuniversiteit Groningen, The Netherlands.
Eur J Biochem. 1994 May 15;222(1):155-61. doi: 10.1111/j.1432-1033.1994.tb18853.x.
Negatively stained complexes of Panulirus interruptus (spiny lobster) hemocyanin with two different monoclonal antibodies, named E and J, were studied by electron microscopy and image processing. The attachment site of the antibodies to the hexameric hemocyanin molecule was deduced from two perpendicular views of hemocyanin/antibody complexes, in which either the threefold axis or one of the twofold axes was oriented perpendicular to the supporting film. Images of complexes in these orientations were searched with reference images simulated from the known X-ray structure of P. interruptus hemocyanin. The two sites were further characterized by combining our results from electron microscopy with structural data obtained by X-ray diffraction and other methods. These two antibodies recognize different non-overlapping epitopes. The epitope for clone E is located on domain 3 at the surface of the beta barrel and consists of certain loops, which form connections between beta-strand structures. The epitope for clone J is situated on domain 1 at the surface of an alpha-helical region and consists mainly of certain alpha-helices connecting loops. The orientation of the hemocyanin hexamers in the two complexes is very different, as is demonstrated most clearly when they form chains. Clone E forms complexes with the threefold axes perpendicular to the chain direction, while for clone J the threefold axes seem to be parallel to the main direction. The angle between the Fab part of an IgG molecule and the threefold axis of the hexamer is 60 +/- 5 degrees for clone E and 35 +/- 7 degrees for clone J. This observation is clearly related to the difference in orientation of the hexamers for the two complexes.
利用电子显微镜和图像处理技术研究了加州刺龙虾血蓝蛋白与两种不同单克隆抗体(分别命名为E和J)形成的负染复合物。通过血蓝蛋白/抗体复合物的两个垂直视图推断抗体与六聚体血蓝蛋白分子的结合位点,其中三重轴或两个二重轴之一垂直于支撑膜。利用从加州刺龙虾血蓝蛋白已知X射线结构模拟的参考图像搜索这些方向上复合物的图像。通过将电子显微镜结果与X射线衍射和其他方法获得的结构数据相结合,进一步表征了这两个位点。这两种抗体识别不同的非重叠表位。克隆E的表位位于β桶表面的结构域3上,由某些环组成,这些环在β链结构之间形成连接。克隆J的表位位于α螺旋区域表面的结构域1上,主要由某些连接环的α螺旋组成。两种复合物中血蓝蛋白六聚体的取向非常不同,当它们形成链时最为明显。克隆E形成的复合物中三重轴垂直于链方向,而克隆J的三重轴似乎与主方向平行。对于克隆E,IgG分子的Fab部分与六聚体三重轴之间的角度为60±5度,对于克隆J为35±7度。这一观察结果显然与两种复合物中六聚体取向的差异有关。