[Three-dimensional helical CT angiography of the abdomen].

To evaluate the quality of three-dimensional (3D) images of the abdominal vasculature acquired using enhanced helical CT, 3D reconstructions were performed for 43 examinations (38 patients). Twenty-one of 43 examinations were also reconstructed by Maximum Intensity Projection (MIP). The CT scanner employed was the Toshiba Xforce. Helical CT data were acquired using up to 20 continuous 1.5-sec rotations with an X-ray beam width of 5 mm and a couchtop movement speed of 5 to 10 mm/1.5 sec. Axial images were reconstructed at a section interval of 2 mm. Optimal protocol on enhanced helical CT was as follows: Iopamidol 300 mg I/ml was administered intravenously using a biphasic technique (3-4 ml/sec for the initial 100 ml, followed by 0.7-1.5 ml for the remaining 50 ml), and delay times of the early and late phases were 25-35 and 90 sec, respectively. Aortic branches were clearly demonstrated on early phase, while portal branches were well defined on late phase. In the visualization of abdominal vessels, 3D images were nearly equal to MIP images. However, for anteroposterior images, MIP images were superior to 3D images in quality, because 3D images had some longitudinal direction artifacts. Three-dimensional images were considered to be useful for correctly evaluating overlapping abdominal vasculatures. From the above results, 3D and MIP images of the abdominal vasculature obtained using enhanced helical CT were considered to compensate for each other.