Suppr超能文献

使用双能数字减影血管造影术对视频密度测定法测量冠状动脉横截面积进行体内验证。

In-vivo validation of videodensitometric coronary cross-sectional area measurement using dual-energy digital subtraction angiography.

作者信息

Molloi S, Ersahin A, Hicks J, Wallis J

机构信息

Department of Radiological Sciences, University of California, Irvine 92717, USA.

出版信息

Int J Card Imaging. 1995 Dec;11(4):223-31. doi: 10.1007/BF01145190.

Abstract

Previous studies indicate that conventional geometric edge detection techniques, used in quantitative coronary arteriography (QCA), have significant limitations in quantitating coronary cross-sectional area of small diameter (D) vessels (D < 1.00 mm) and lesions with complex cross-section. As a solution to this problem, we have previously reported on an in-vitro validation of a videodensitometric technique that quantitates the absolute cross-sectional area including small vessel diameter (D < 1.00 mm) and any complex shape of the vessel cross-section. For in-vivo validation, plastic tubing (5-8 mm long) with different shape complex cross-section with known cross-sectional area (A = 0.8-4.5 mm2) were percutaneously wedged in the coronary arteries of anesthetized pigs (40-50 kg). Contrast material injections (6-10 ml at 2-4 ml/sec) were made into the left main coronary artery during image acquisition using a motion immune dual-energy subtraction technique, where low and high X-ray energy and filtration were switched at 30 Hz. A comparison was made between the actual and measured cross-sectional area using the videodensitometry and edge detection techniques in tissue suppressed energy subtracted images. In eighteen comparisons the videodensitometry technique produced significantly improved results (slope = 0.87, intercept = 0.24 mm2, r = 0.94) when compared to the edge detection technique (slope = 0.42, intercept = 1.99 mm2, r = 0.39). Also, a cylindrical vessel phantom (D = 1.00-4.75 mm) was used to test the ability to calculate and correct for the effect of the out of plane angle of the arterial segment on the cross-sectional area estimation of the videodensitometry technique. After corrections were made for the out of plane angle using two different projections, there was a good correlation between the actual and the measured cross-sectional area using the videodensitometry technique (slope = 0.91, intercept = 0.11 mm2, r = 0.99). These data suggest that it is possible to quantitate absolute cross-sectional area without any assumption regarding the arterial shape using videodensitometry in conjunction with the motion immune dual-energy subtraction technique.

摘要

先前的研究表明,定量冠状动脉造影(QCA)中使用的传统几何边缘检测技术,在测量小直径(D)血管(D < 1.00 mm)和具有复杂横截面的病变的冠状动脉横截面积时存在显著局限性。作为解决该问题的方法,我们先前报道了一种视频密度测定技术的体外验证,该技术可定量包括小血管直径(D < 1.00 mm)和血管横截面任何复杂形状在内的绝对横截面积。为进行体内验证,将具有不同形状复杂横截面且已知横截面积(A = 0.8 - 4.5 mm²)的塑料管(5 - 8 mm长)经皮楔入麻醉猪(40 - 50 kg)的冠状动脉中。在使用运动免疫双能减影技术进行图像采集期间,向左主冠状动脉注入造影剂(6 - 10 ml,流速为2 - 4 ml/秒),其中低能和高能X射线及滤过以30 Hz切换。在组织抑制能量减影图像中,使用视频密度测定法和边缘检测技术对实际横截面积与测量横截面积进行了比较。在18次比较中,与边缘检测技术(斜率 = 0.42,截距 = 1.99 mm²,r = 0.39)相比,视频密度测定技术产生了显著更好的结果(斜率 = 0.87,截距 = 0.24 mm²,r = 0.94)。此外,使用圆柱形血管模型(D = 1.00 - 4.75 mm)来测试计算和校正动脉节段平面外角度对视频密度测定技术横截面积估计影响的能力。使用两种不同投影对平面外角度进行校正后,视频密度测定技术测量的实际横截面积与测量横截面积之间存在良好相关性(斜率 = 0.91,截距 = 0.11 mm²,r = 0.99)。这些数据表明,结合运动免疫双能减影技术使用视频密度测定法,无需对动脉形状做任何假设就有可能定量绝对横截面积。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验