Suppr超能文献

使用机载旋转面罩进行远视性准分子激光原位角膜磨镶术后兔角膜的地形图

Topography of rabbit corneas after photorefractive keratectomy for hyperopia using airborne rotational masks.

作者信息

Dierick H G, Van Mellaert C E, Missotten L

机构信息

Excimer Study Group, St Vicentius Ziekenhuis, Antwerpen, Belgium.

出版信息

J Refract Surg. 1996 Nov-Dec;12(7):774-82. doi: 10.3928/1081-597X-19961101-09.

Abstract

PURPOSE

To determine the long-term outcome of photorefractive keratectomy (PRK) for hyperopia on the rabbit cornea using ablation profiles with a smooth transition zone.

METHODS

Two profiles were ablated by means of an excimer laser and rotational masks, each profile on four rabbit eyes. Corrections of +10 diopters (D) were planned in all operations. The right eye was treated with a 4-mm optical zone and a 2-mm transition zone (4-mm/8-mm profile), the left eye with a 4-mm ablation and a 1-mm transition zone (4-mm/6-mm profile). Corneal topography was measured with an EyeSys videokeratoscope at 3, 10, 20, 30, 40, 50, 65, 75 and 120 weeks postoperatively.

RESULTS

After more than 2 years the axial power-not corrected for the physiologic flattening of the corneas-showed a residual steepening of +3.60 (+/-3.90) D for the right eyes and +3.9 (+/-2.8) D for the left eyes. The diameter of the topographic optical zone was equal to or smaller than the innermost mire. The power started to decrease paracentrally, giving the profile graph of the power a characteristic peak pattern. The flat transition zone, typical of PRK for hyperopia, could be recognized on the Placido images as a characteristic broadening of the midperipheral rings. The axial power map and the power profile did not show this flattening in the transition zone.

CONCLUSION

A steepening of the central cornea by PRK is possible. The diameter of the topographic optical zone of homogeneous power is smaller than induced, increasing considerably the asphericity of the central cornea. The 4-mm/8-mm ablation profiles did not give a larger diameter topographic optical zone nor less regression than the 4-mm/6-mm ablation profiles. The videokeratoscope makes errors in measuring axial power of mixed convex-concave surfaces.

摘要

目的

使用具有平滑过渡区的消融轮廓,确定兔眼角膜上远视性准分子激光原位角膜磨镶术(PRK)的长期效果。

方法

通过准分子激光和旋转掩膜消融两种轮廓,每种轮廓在四只兔眼上进行。所有手术均计划矫正+10屈光度(D)。右眼采用4毫米光学区和2毫米过渡区(4毫米/8毫米轮廓)治疗,左眼采用4毫米消融区和1毫米过渡区(4毫米/6毫米轮廓)治疗。术后3、10、20、30、40、50、65、75和120周,使用EyeSys角膜地形图仪测量角膜地形图。

结果

两年多后,未对角膜的生理性变平进行校正的轴向屈光度显示,右眼残余陡峭度为+3.60(±3.90)D,左眼为+3.9(±2.8)D。地形图光学区的直径等于或小于最内侧的视标。屈光度开始在旁中心区域降低,使屈光度轮廓图呈现出特征性的峰值模式。远视性PRK典型的平坦过渡区在普拉西多图像上可表现为中周边环带的特征性增宽。轴向屈光度图和屈光度轮廓在过渡区未显示出这种变平。

结论

PRK可导致中央角膜变陡峭。均匀屈光度的地形图光学区直径小于诱导值,显著增加了中央角膜的非球面性。4毫米/8毫米消融轮廓与4毫米/6毫米消融轮廓相比,并未产生更大直径的地形图光学区,也未减少回退。角膜地形图仪在测量混合凸凹表面的轴向屈光度时会产生误差。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验